Fall 2015 Credit - Engineering Technology

 

See Engineering Technology Classes for
| Richland | 100% Online Classes |

Night classes listed in shaded color
Controlled enrollment classes listed in shaded color
Course-Num-Sect(Reg#)
Title
Class Meeting
Information
Faculty Loc
Credits
Start/End
Date
Co-req
Sections
Class
Features
ARCE-1303  Arch Mat/Methods of ConstructEastfield College [EFC]
ARCE-1303-41426 (975923)
Arch Mat/Methods of Construct
TBA   INET  
M T W R F S U    
Riddle, Kelly  Vita
EFC
3
8/31/15
12/17/15
  eCampus
Internet Based
 
 NOTE: ARCE 1303.41426 ONLINE requires MS Word & Internet access. This course utilizes AutoDesk AutoCAD Software. Contact Marqueswashington@dcccd.edu for information on this course.
ARCE-1303  Arch Mat/Methods of Construct100% Online [INET]
ARCE-1303-91400 (988240)
Arch Mat/Methods of Construct
TBA   INET  
M T W R F S U    
Riddle, Kelly  Vita
EFC/DCO
3
8/31/15
12/17/15
  eCampus
Internet Based
Class Request Form  
 NOTE: ARCE 1303.41426 ONLINE requires MS Word & Internet access. This course utilizes AutoDesk AutoCAD Software. Contact Marqueswashington@dcccd.edu for information on this course.
ARCE-1421  Architectural IllustrationEastfield College [EFC]
ARCE-1421-41426 (975928)
Architectural Illustration
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Goitia, Tina  Vita
EFC
4
8/31/15
12/17/15
  eCampus
Internet Based
 
 NOTE: ARCE 1421.41426 ONLINE requires MS Word & Internet access. This course utilizes AutoDesk AutoCAD Software. Contact Tinagoitia@dcccd.edu for information on this course.
ARCE-1421  Architectural IllustrationMountain View College [MVC]
ARCE-1421-61280 (1007021)
Architectural Illustration
TBA   LEC  
M W F   10:18 AM   11:48 AM
TBA   LAB  
M W F   10:18 AM   11:48 AM
Alsabrook, Marissa  Vita
MVC
4
8/31/15
12/17/15
  eCampus
 
 For Duncanville HS Dual Credit students only
ARCE-1421-61281 (1007023)
Architectural Illustration
TBA   LEC  
M W F   12:25 PM   1:55 PM
TBA   LAB  
M W F    
Alsabrook, Marissa  Vita
MVC
4
8/31/15
12/17/15
   
 For Duncanville HS Dual Credit students only
ARCE-1421-61282 (1007027)
Architectural Illustration
TBA   LEC  
T R   8:30 AM   10:10 AM
TBA   LAB  
T R    
Alsabrook, Marissa  Vita
MVC
4
8/31/15
12/17/15
   
 For Duncanville HS Dual Credit students only
ARCE-1421-61283 (1007029)
Architectural Illustration
TBA   LEC  
T R   10:18 AM   11:48 AM
TBA   LAB  
T R    
Alsabrook, Marissa  Vita
MVC
4
8/31/15
12/17/15
   
 For Duncanville HS Dual Credit students only
ARCE-1421-61400 (981760)
Architectural Illustration
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Osagie, Usunobun  Vita
MVC
4
8/31/15
12/17/15
  eCampus
Internet Based
 
 Students signed up for online classes will be sent an email on the first day of class with instructions and a video on how to log on and navigate eCampus. Students must have a valid email address. Students who do not enroll prior to the first day or do not receive an email on the first day must email the instructor at sbillingslea@dcccd.edu. Online students who would like to use the CADD Lab are welcome to during the posted hours.
CETT-1403  DC CircuitsEastfield College [EFC]
CETT-1403-41001 (975462)
DC Circuits
L107   LEC  
M   10:50 AM   1:30 PM
L107   LAB  
W   10:50 AM   1:30 PM
Rawlins, John  Vita
EFC
4
8/31/15
12/17/15
  eCampus
 
CETT-1403-41306 (996016)
DC Circuits
OSGHS   LEC  
M T W R F   10:42 AM   11:25 AM
OSGHS   LAB  
M T W R F   11:30 AM   12:12 PM
Miller, Amber  Vita
EFC
4
8/31/15
12/17/15
   
 Note: Dual Credit at South Garland High School
CETT-1403-41307 (996022)
DC Circuits
OSGHS   LEC  
M T W R F   1:00 PM   1:40 PM
OSGHS   LAB  
M T W R F   1:45 PM   2:30 PM
Miller, Amber  Vita
EFC
4
8/31/15
12/17/15
   
 Note: Dual Credit at South Garland High School
CETT-1403-41501 (975465)
DC Circuits
L100   LEC  
M   5:20 PM   8:00 PM
L107   LAB  
W   5:20 PM   8:00 PM
Boyd, Rodney  Vita
EFC
4
8/31/15
12/17/15
  eCampus
 
CETT-1403-41702 (997528)
DC Circuits
L106   LEC  
M T W R F S U    
L106   LAB  
M T W R F S U    
Dye, Arch  Vita
EFC
4
9/3/15
12/15/15
(16 weeks)
  eCampus
Flex Term Sept.
 
 Note: This section is restricted to AT&T employees only
CETT-1403  DC CircuitsMountain View College [MVC]
CETT-1403-61470 (983336)
DC Circuits
W107C   LEC  
T R   9:30 AM   10:50 AM
INET   LAB  
M T W R F S U    
Green, Tommy  Vita
MVC
4
8/31/15
12/17/15
  eCampus
 
 Course documents and instructions must be accessed at http://ecampus.dcccd.edu the first day of class.
CETT-1403-61400 (983334)
DC Circuits
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Green, Tommy  Vita
MVC
4
8/31/15
12/17/15
  eCampus
Internet Based
 
 Course documents and instructions must be accessed at http://ecampus.dcccd.edu the first day of class.
CETT-1403  DC CircuitsRichland College [RLC]
CETT-1403-81001 (983190)
DC Circuits
WH151   LEC  
M   11:00 AM   1:50 PM
WH151   LAB  
T   11:00 AM   1:50 PM
Goldammer, Kory  Vita
RLC
4
8/31/15
12/17/15
  eCampus
 
CETT-1403-81950 (1005114)
DC Circuits
C226   LEC  
M T   1:10 PM   1:55 PM
C226   LAB  
M T   1:10 PM   1:55 PM
C226   LEC  
M T   2:00 PM   3:55 PM
C226   LAB  
M T   2:00 PM   3:55 PM
WH127   LEC  
W R F   1:10 PM   3:55 PM
WH127   LAB  
W R F   1:10 PM   3:55 PM
Francis, Jay  Vita
RLC
4
8/24/15
12/17/15
(16 weeks)
  eCampus
Flex Term Aug.
 
 Dual Credit Section 81950 meets 8/24-12/17. No class Mon, 9/7, and Thurs & Fri, 11/26-27. For Conrad High School students only. Enrollment by petition only with Dual Credit Staff/ Note: Students meet MT in C226 and meet WRF in WH127.
CETT-1403-81002 (991141)
DC Circuits
WH151   LEC  
R   8:00 AM   10:50 AM
WH151   LAB  
F   8:00 AM   10:50 AM
Houle, Stephen  Vita
RLC
4
8/31/15
12/17/15
  eCampus
 
CETT-1403-81501 (983192)
DC Circuits
WH151   LEC  
T   5:40 PM   8:25 PM
WH151   LAB  
R   5:40 PM   8:25 PM
Farcasiu, Simona  Vita
RLC
4
8/31/15
12/17/15
  eCampus
 
CETT-1403  DC Circuits100% Online [INET]
CETT-1403-91400 (988194)
DC Circuits
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Green, Tommy  Vita
MVC/DCO
4
8/31/15
12/17/15
  eCampus
Internet Based
Class Request Form  
CETT-1405  Ac CircuitsEastfield College [EFC]
CETT-1405-41701 (997533)
Ac Circuits
L106   LEC  
M T W R F S U    
L106   LAB  
M T W R F S U    
Dye, Arch  Vita
EFC
4
9/3/15
12/15/15
(16 weeks)
  eCampus
Flex Term Sept.
 
 Note: This section is restricted to AT&T employees only.
CETT-1405  Ac CircuitsMountain View College [MVC]
CETT-1405-61470 (983348)
Ac Circuits
W107C   LEC  
T R   11:00 AM   12:20 PM
INET   LAB  
M T W R F S U    
Green, Tommy  Vita
MVC
4
8/31/15
12/17/15
  eCampus
 
CETT-1405-61400 (983345)
Ac Circuits
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Green, Tommy  Vita
MVC
4
8/31/15
12/17/15
  eCampus
Internet Based
 
 Course documents and instructions must be accessed at http://ecampus.dcccd.edu the first day of class.
CETT-1405  Ac CircuitsRichland College [RLC]
CETT-1405-81501 (983195)
Ac Circuits
WH109   LEC  
M   5:40 PM   8:25 PM
WH151   LAB  
W   5:40 PM   8:25 PM
Hicks, Troy  Vita
RLC
4
8/31/15
12/17/15
  eCampus
 
 PreReq: CETT 1403
CETT-1405  Ac Circuits100% Online [INET]
CETT-1405-91400 (988198)
Ac Circuits
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Green, Tommy  Vita
MVC/DCO
4
8/31/15
12/17/15
  eCampus
Internet Based
Class Request Form  
CETT-1425  Digital FundamentalsEastfield College [EFC]
CETT-1425-41001 (975474)
Digital Fundamentals
L100   LEC  
T   8:00 AM   10:40 AM
L100   LAB  
R   8:00 AM   10:40 AM
Dye, Arch  Vita
EFC
4
8/31/15
12/17/15
  eCampus
 
CETT-1425-41501 (975475)
Digital Fundamentals
L100   LEC  
T   5:20 PM   8:00 PM
L100   LAB  
R   5:20 PM   8:00 PM
Miller, Amber  Vita
EFC
4
8/31/15
12/17/15
  eCampus
 
CETT-1425-41701 (997535)
Digital Fundamentals
L106   LEC  
M T W R F S U    
L106   LAB  
M T W R F S U    
Dye, Arch  Vita
EFC
4
9/3/15
12/15/15
(16 weeks)
  eCampus
Flex Term Sept.
 
 Note: This section is restricted to AT&T employees only.
CETT-1425  Digital FundamentalsMountain View College [MVC]
CETT-1425-61470 (983351)
Digital Fundamentals
W107C   LEC  
M W   11:00 AM   12:20 PM
INET   LAB  
M T W R F S U    
Green, Tommy  Vita
MVC
4
8/31/15
12/17/15
  eCampus
 
CETT-1425  Digital FundamentalsRichland College [RLC]
CETT-1425-81001 (983199)
Digital Fundamentals
WH127   LEC  
R   8:00 AM   10:50 AM
WH127   LAB  
F   8:00 AM   10:50 AM
Bradbury, James  Vita
RLC
4
8/31/15
12/17/15
  eCampus
 
CETT-1425-81890 (1021259)
Digital Fundamentals
SCOCL   LEC  
M T W R F   2:45 PM   3:25 PM
SCOCL   LAB  
M T W R F   3:30 PM   4:15 PM
Strong, Eric  Vita
RLC
4
10/22/15
6/2/16
(16 weeks)
  eCampus
Flex Term Oct.
 
 Dual Credit Section 81890 meets 10/22/15 to 6/02/16 at Townview TAG High School. Enrollment by petition only with Dual Credit Staff.
CETT-1429  Solid State DevicesEastfield College [EFC]
CETT-1429-41701 (997529)
Solid State Devices
L106   LEC  
M T W R F S U    
L106   LAB  
M T W R F S U    
Dye, Arch  Vita
EFC
4
9/3/15
12/15/15
(16 weeks)
  eCampus
Flex Term Sept.
 
 Note: This section is restricted to AT&T employees only.
CETT-1429  Solid State DevicesMountain View College [MVC]
CETT-1429-61470 (983353)
Solid State Devices
W107C   LEC  
M W   9:30 AM   10:50 AM
INET   LAB  
M T W R F S U    
Green, Tommy  Vita
MVC
4
8/31/15
12/17/15
  eCampus
 
CETT-1441  Solid State CircuitsEastfield College [EFC]
CETT-1441-41001 (975481)
Solid State Circuits
L107   LEC  
T   8:00 AM   10:40 AM
L107   LAB  
R   8:00 AM   10:40 AM
Rawlins, John  Vita
EFC
4
8/31/15
12/17/15
  eCampus
 
CETT-1449  Digital SystemsEastfield College [EFC]
CETT-1449-41001 (975484)
Digital Systems
L106   LEC  
M   10:50 AM   1:30 PM
L106   LAB  
W   10:50 AM   1:30 PM
Dye, Arch  Vita
EFC
4
8/31/15
12/17/15
  eCampus
 
CETT-1449-41501 (975487)
Digital Systems
L107   LEC  
T   5:20 PM   8:00 PM
L107   LAB  
R   5:20 PM   8:00 PM
Dye, Arch  Vita
EFC
4
8/31/15
12/17/15
  eCampus
 
CETT-1449  Digital SystemsMountain View College [MVC]
CETT-1449-61470 (985363)
Digital Systems
W123   LEC  
S   8:00 AM   10:50 AM
INET   LAB  
M T W R F S U    
Keenan, Douglas  Vita
MVC
4
8/31/15
12/17/15
  eCampus
 
CETT-1457  Linear Integrated CircuitsRichland College [RLC]
CETT-1457-81001 (983202)
Linear Integrated Circuits
WH127   LEC  
M   11:00 AM   1:50 PM
WH127   LAB  
T   11:00 AM   1:50 PM
Kohan, Stanford  Vita
RLC
4
8/31/15
12/17/15
  eCampus
 
 PreReq: CETT 1429
CETT-2480  Cooperative Education-ComputerEastfield College [EFC]
CETT-2480-41001 (975693)
Cooperative Education-Computer
TBA   LEC  
M T W R F S U    
TBA   COOP  
M T W R F S U    
Rawlins, John  Vita
EFC
4
8/31/15
12/17/15
  eCampus
 
 NOTE: CETT 2480.41001 COOP ORIENTATION Contact Clay Rawlins at 972-860-7670 in L103 during first week of class. You must work at least 20 hours per week in an electronics related industry to participate in this course.
CETT-2481  Cooperative Education-ComputerEastfield College [EFC]
CETT-2481-41001 (975697)
Cooperative Education-Computer
TBA   LEC  
M T W R F S U    
TBA   COOP  
M T W R F S U    
Rawlins, John  Vita
EFC
4
8/31/15
12/17/15
  eCampus
 
 NOTE: CETT 2481.41001 COOP ORIENTATION Contact Clay Rawlins at 972-860-7670 in L103 during first week of class. You must work at least 20 hours per week in an electronics related industry to participate in this course.
DFTG-1309  Basic Computer-Aided DraftingRichland College [RLC]
DFTG-1309-81001 (986032)
Basic Computer-Aided Drafting
WH153   LEC  
M W   8:00 AM   8:55 AM
WH153   LAB  
M W   9:00 AM   10:50 AM
Fleming, Brian  Vita
RLC
3
8/31/15
12/17/15
  eCampus
 
 Topic: AUTOCAD 2014 software used.
DFTG-1309-81002 (983203)
Basic Computer-Aided Drafting
WH153   LEC  
T R   11:00 AM   11:55 AM
WH153   LAB  
T R   12:00 PM   1:50 PM
Zipper, Patricia  Vita
RLC
3
8/31/15
12/17/15
  eCampus
 
 Topic: AUTOCAD 2014 software used.
DFTG-1309-81965 (1006950)
Basic Computer-Aided Drafting
TBA   LEC  
T R   1:00 PM   1:30 PM
TBA   LAB  
T R   1:35 PM   2:25 PM
Ortley, Lester  Vita
RLC
3
8/31/15
6/3/16
(16 weeks)
  eCampus
Flex Term Aug.
 
 Dual Credit Section 81965 meets 8/31/15 to 6/03/16 at North Garland High School. Enrollment by petition only with Dual Credit Staff.
DFTG-1309-81250 (986033)
Basic Computer-Aided Drafting
WH153   LEC  
F   9:00 AM   10:50 AM
WH153   LAB  
F   11:00 AM   2:40 PM
Miller, James  Vita
RLC
3
8/31/15
12/17/15
  eCampus
 
 Topic: AUTOCAD 2014 software used/ Note: No class 11/27.
DFTG-1309-81251 (986034)
Basic Computer-Aided Drafting
WH153   LEC  
S   9:00 AM   10:50 AM
WH153   LAB  
S   11:00 AM   2:40 PM
McVea, Kenneth  Vita
RLC
3
9/12/15
12/12/15
(14 weeks)
  eCampus
Flex Term Sept.
 
 Delivery: Flex Term meets Saturdays, 9/12-12/12. No class 11/28/ Topic: AUTOCAD 2014 software used.
DFTG-1309-81930 (1027361)
Basic Computer-Aided Drafting
SCOCL   LEC  
M T W R F   11:50 AM   12:15 PM
SCOCL   LAB  
M T W R F   12:20 PM   12:40 PM
Moore, John  Vita
RLC
3
11/23/15
6/6/16
(16 weeks)
  Flex Term Nov.
 
 Dual Credit Section 81930 meets 11/23/15 to 6/06/16 at Lake Highlands High School. Enrollment by petition only with Dual Credit Staff.
DFTG-1309-81400 (983206)
Basic Computer-Aided Drafting
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Fleming, Brian  Vita
RLC
3
8/31/15
12/17/15
  eCampus
Internet Based
 
 Delivery: Online. No on-campus meetings/ Topic: AUTOCAD 2010 or later required. AutoCAD LT cannot be used/ Reqd: Log on to http://ecampus.dcccd.edu
DFTG-1309-81501 (983205)
Basic Computer-Aided Drafting
WH153   LEC  
T R   5:40 PM   6:35 PM
WH153   LAB  
T R   6:40 PM   8:25 PM
Manouchehripour, Muhammed  Vita
RLC
3
8/31/15
12/17/15
  eCampus
 
 Topic: AUTOCAD 2014 software used.
DFTG-1309  Basic Computer-Aided Drafting100% Online [INET]
DFTG-1309-91400 (988514)
Basic Computer-Aided Drafting
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Fleming, Brian  Vita
RLC/DCO
3
8/31/15
12/17/15
  eCampus
Internet Based
Class Request Form  
 Delivery: Online. No on-campus meetings/ Topic: AUTOCAD 2010 or later required. AutoCAD LT cannot be used/ Reqd: Log on to http://ecampus.dcccd.ed/
DFTG-1315  Architectural Blueprint ReadinEastfield College [EFC]
DFTG-1315-41426 (975929)
Architectural Blueprint Readin
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Russell, Matthew  Vita
EFC
3
8/31/15
12/17/15
  eCampus
Internet Based
 
 NOTE: DFTG 1315.41426 ONLINE requires MS Word & Internet access. Blueprints in this course cover Architectural Drawings. Contact Marques Washington at Marqueswashington@dcccd.edu or 972-860-7338 for more informationon this course.
DFTG-1315  Architectural Blueprint Readin100% Online [INET]
DFTG-1315-91400 (988515)
Architectural Blueprint Readin
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Russell, Matthew  Vita
EFC/DCO
3
8/31/15
12/17/15
  eCampus
Internet Based
Class Request Form  
 NOTE: DFTG 1315.41426 ONLINE requires MS Word & Internet access. Blueprints in this course cover Architectural Drawings. Contact Marqueswashington@dcccd.edu or 972-860-7338 for more information on this course.
DFTG-1325  Blueprint Reading & SketchingEastfield College [EFC]
DFTG-1325-41001 (975936)
Blueprint Reading & Sketching
L118   LEC  
M W   10:00 AM   10:55 AM
TBA   LAB  
M T W R F S U    
Washington, Marques  Vita
EFC
3
8/31/15
12/17/15
  eCampus
 
 NOTE: DFTG 1325.41001 Blueprints in this course cover Mechanical/Machine Parts. Additional lab time is required but is not scheduled. Labs can be completed at home or during open lab hours. Contact Marques Washington at Marqueswashington@dcccd.edu or 972-860-7338 for more informationon this course.
DFTG-1325-41426 (975933)
Blueprint Reading & Sketching
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Washington, Marques  Vita
EFC
3
8/31/15
12/17/15
  eCampus
Internet Based
 
 NOTE: DFTG 1315.41426 ONLINE requires MS Word & Internet access. Blueprints in this course cover Mechanical/Machine Parts. Contact Marques Washington at Marqueswashington@dcccd.edu or 972-860-7338 for more information on this course.
DFTG-1325  Blueprint Reading & Sketching100% Online [INET]
DFTG-1325-91400 (988516)
Blueprint Reading & Sketching
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Washington, Marques  Vita
EFC/DCO
3
8/31/15
12/17/15
  eCampus
Internet Based
Class Request Form  
 NOTE: DFTG 1315.41426 ONLINE requires MS Word & Internet access. Blueprints in this course cover Mechanical/Machine Parts. Contact Marqueswashington@dcccd.edu or 972-860-7338 for more information on this course.
DFTG-1329  Elec-Mech DrftEastfield College [EFC]
DFTG-1329-41426 (975957)
Elec-Mech Drft
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Washington, Marques  Vita
EFC
3
8/31/15
12/17/15
  eCampus
Internet Based
 
 NOTE: DFTG 1329.41426 ONLINE Course requires internet access. This course utilizes AutoDesk AutoCAD.Contact Marques Washington at Marqueswashington@dcccd.edu or 972-860-7338 for more information on this course.
DFTG-1329  Elec-Mech Drft100% Online [INET]
DFTG-1329-91400 (988519)
Elec-Mech Drft
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Washington, Marques  Vita
EFC/DCO
3
8/31/15
12/17/15
  eCampus
Internet Based
Class Request Form  
 NOTE: DFTG 1329.41426 ONLINE Course requires internet access. This course utilizes AutoDesk AutoCAD. Contact Marqueswashington@dcccd.edu for more information on this course.
DFTG-1340  Intro to Cad SystemsEastfield College [EFC]
DFTG-1340-41426 (975961)
Intro to Cad Systems
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Hutchins, Micheal  Vita
EFC
3
8/31/15
12/17/15
  eCampus
Internet Based
 
 NOTE: DFTG 1340.41426 ONLINE course requires internet access. Coursework revolves around introduction to computers and software. If you need an AutoCAD drawing course, please register for 1405 or 1409. Contact Micheal Hutchins at MichealHutchins@dcccd.edu or 972-860-7681 for more information this course.
DFTG-1340  Intro to Cad Systems100% Online [INET]
DFTG-1340-91400 (988521)
Intro to Cad Systems
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Hutchins, Micheal  Vita
EFC/DCO
3
8/31/15
12/17/15
  eCampus
Internet Based
Class Request Form  
 NOTE: DFTG 1340.43426 ONLINE course requires internet access. Coursework revolves around introduction to computers and software. If you need an AutoCAD drawing course, please register for 1405 or 1409. Contact MichealHutchins@dcccd.edu or 972-860-7681 for more information this course.
DFTG-1405  Techn DraftingEastfield College [EFC]
DFTG-1405-41001 (975966)
Techn Drafting
L118   LEC  
M W   8:00 AM   8:55 AM
L118   LAB  
M W   9:00 AM   9:55 AM
TBA   LAB  
M T W R F S U    
Washington, Marques  Vita
EFC
4
8/31/15
12/17/15
  eCampus
 
 NOTE: DFTG 1405.41001 This course utilizes AutoDesk AutoCAD Software. Introduction course to Computer Aided Drafting and Design and Pencil Sketching. Additional lab time is required but is not scheduled. Labs can be completed at home or during open lab hours. Contact Marques Washington at Marqueswashington@dcccd.edu or 972-860-7338 for more information on this course.
DFTG-1405-41288 (996037)
Techn Drafting
OSLHS   LEC  
T R   1:30 PM   3:40 PM
OSLHS   LAB  
F   1:00 PM   2:20 PM
Washington, Marques  Vita
EFC
4
8/31/15
12/17/15
  eCampus
 
 Note: Dual Credit Class Taught at Skyline High School
DFTG-1405-41426 (975972)
Techn Drafting
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Goitia, Tina  Vita
EFC
4
8/31/15
12/17/15
  eCampus
Internet Based
 
 DFTG 1405.41426 ONLINE course requires internet access. This course utilizes AutoDesk AutoCAD Software. Introduction course to Computer Aided Drafting and Design and Pencil Sketching. Contact Tina Goitia at Tinagoitia@dcccd.edu for more information on this course.
DFTG-1405-41501 (975974)
Techn Drafting
L118   LEC  
M W   5:35 PM   6:30 PM
L118   LAB  
M W   6:35 PM   7:00 PM
TBA   LAB  
M T W R F    
Riddle, Kelly  Vita
EFC
4
8/31/15
12/17/15
  eCampus
 
 DFTG 1405.41501 This course utilizes AutoDesk AutoCAD Software. Introduction course to Computer Aided Drafting and Design and Pencil Sketching. Additional lab time is required but is not scheduled. Labs can be completed at home or during open lab hours. Contact Marques Washington at Marqueswashington@dcccd.edu or 972-860-7338 for more information on this course.
DFTG-1405  Techn DraftingMountain View College [MVC]
DFTG-1405-61470 (980290)
Techn Drafting
W113   LEC  
T R   11:00 AM   11:50 AM
W113   LAB  
M T W R F    
Woodward, David  Vita
MVC
4
8/31/15
12/17/15
  eCampus
 
 The CADD Labs use Intel Dual Core Computers, networked with Windows 7 64 Bit operating system. All classes will be held with Video lectures and Demos. Lab time is required, but is not scheduled. Lab hours are from 9 a.m. until 9 p.m, Monday through Thursday and Fridays 9 a.m. until 4 p.m. These classes will use AutoDesk software and SolidWorks.
DFTG-1405-61250 (980344)
Techn Drafting
W113   LEC  
S   12:00 PM   1:50 PM
W113   LAB  
S    
Rodriguez, Adolph  Vita
MVC
4
8/31/15
12/17/15
  eCampus
 
DFTG-1405-61400 (981817)
Techn Drafting
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Billingslea, Steven  Vita
MVC
4
8/31/15
12/17/15
  eCampus
Internet Based
 
 Students signed up for online classes will be sent an email on the first day of class with instructions and a video on how to log on and navigate eCampus. Students must have a valid email address. Students who do not enroll prior to the first day or do not receive an email on the first day must email the instructor at sbillingslea@dcccd.edu. Online students who would like to use the CADD Lab are welcome to during the posted hours.
DFTG-1405-61475 (980298)
Techn Drafting
W113   LEC  
M W   5:30 PM   6:20 PM
W113   LAB  
M T W R F    
Billingslea, Steven  Vita
MVC
4
8/31/15
12/17/15
  eCampus
 
 The CADD Labs use Intel Dual Core Computers, networked with Windows 7 64 Bit operating system. All classes will be held with Video lectures and Demos. Lab time is required, but is not scheduled. Lab hours are from 9 a.m. until 9 p.m, Monday through Thursday and Fridays 9 a.m. until 4 p.m. These classes will use AutoDesk software and SolidWorks.
DFTG-1405  Techn Drafting100% Online [INET]
DFTG-1405-91400 (988523)
Techn Drafting
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Goitia, Tina  Vita
EFC/DCO
4
8/31/15
12/17/15
  eCampus
Internet Based
Class Request Form  
 DFTG 1405.41426 ONLINE course requires internet access. This course utilizes AutoDesk AutoCAD Software. Introduction course to Computer Aided Drafting and Design and Pencil Sketching. Contact Tinagoitia@dcccd.edu for more information on this course.
DFTG-1405-91401 (988525)
Techn Drafting
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Billingslea, Steven  Vita
MVC/DCO
4
8/31/15
12/17/15
  eCampus
Internet Based
Class Request Form  
 Students signed up for online classes will be sent an email on the first day of class with instructions and a video on how to log on and navigate eCampus. Students must have a valid email address. Students who do not enroll prior to the first day or do not receive an email on the first day must email the instructor at sbillingslea@dcccd.edu. Online students who would like to use the CADD Lab are welcome to during the posted hours.
DFTG-1409  Basic Computer-Aided DraftingEastfield College [EFC]
DFTG-1409-41288 (996048)
Basic Computer-Aided Drafting
OSLHS   LEC  
M W   1:30 PM   3:40 PM
OSLHS   LAB  
F   2:25 PM   3:45 PM
Hutchins, Micheal  Vita
EFC
4
8/31/15
12/17/15
  eCampus
 
 Note: Dual Credit Class Taught at Skyline High School
DFTG-1409-41001 (975977)
Basic Computer-Aided Drafting
L119   LEC  
T R   9:00 AM   9:55 AM
L119   LAB  
T R   10:00 AM   11:00 AM
TBA   LAB  
M T W R F    
Hutchins, Micheal  Vita
EFC
4
8/31/15
12/17/15
  eCampus
 
 DFTG 1409.41001 This course utilizes AutoDesk AutoCAD Software. Introduction course to Computer Aided Drafting and Design. Additional lab time is required but is not scheduled. Labs can be completed at home or during open lab hours. Contact Micheal Hutchins at MichealHutchins@dcccd.edu or 972-860-7681 for more information on this course.
DFTG-1409-41426 (975979)
Basic Computer-Aided Drafting
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Goitia, Tina  Vita
EFC
4
8/31/15
12/17/15
  eCampus
Internet Based
 
 DFTG 1409.41426 ONLINE course requires internet access. Introduction course to Computer Aided Drafting and Design. This course utilizes AutoDesk AutoCAD Software. Contact Tina Goitia at Tinagoitia@dcccd.edu for more information on this course.
DFTG-1409-41501 (975981)
Basic Computer-Aided Drafting
L119   LEC  
T R   5:35 PM   6:30 PM
L119   LAB  
T R   6:35 PM   6:55 PM
TBA   LAB  
M T W R F S U    
Hutchins, Micheal  Vita
EFC
4
8/31/15
12/17/15
  eCampus
 
 DFTG 1409.41501 This course utilizes AutoDesk AutoCAD Software. Introduction course to Computer Aided Drafting and Design. Additional lab time is required but is not scheduled. Labs can be completed at home or during open lab hours. Contact Micheal Hutchins at 972-860-7681 or MichealHutchins@dcccd.edu for more information on this course.
DFTG-1409  Basic Computer-Aided DraftingMountain View College [MVC]
DFTG-1409-61470 (980291)
Basic Computer-Aided Drafting
W113   LEC  
T R   9:00 AM   9:50 AM
W113   LAB  
M T W R F    
Billingslea, Steven  Vita
MVC
4
8/31/15
12/17/15
  eCampus
 
 The CADD Labs use Intel Dual Core Computers, networked with Windows 7 64 Bit operating system. All classes will be held with Video lectures and Demos. Lab time is required, but is not scheduled. Lab hours are from 9 a.m. until 9 p.m, Monday through Thursday and Fridays 9 a.m. until 4 p.m. This class will use AUTOCAD 2016
DFTG-1409-61250 (980357)
Basic Computer-Aided Drafting
W113   LEC  
S   8:00 AM   9:50 AM
W113   LAB  
S    
Rodriguez, Adolph  Vita
MVC
4
8/31/15
12/17/15
  eCampus
 
 This class will use AUTOCAD 2016
DFTG-1409-61400 (981771)
Basic Computer-Aided Drafting
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Billingslea, Steven  Vita
MVC
4
8/31/15
12/17/15
  eCampus
Internet Based
 
 Students signed up for online classes will be sent an email on the first day of class with instructions and a video on how to log on and navigate eCampus. Students must have a valid email address. Students who do not enroll prior to the first day or do not receive an email on the first day must email the instructor at sbillingslea@dcccd.edu. Online students who would like to use the CADD Lab are welcome to during the posted hours. This class will use AUTOCAD 2016
DFTG-1409-61475 (980302)
Basic Computer-Aided Drafting
W113   LEC  
T R   5:30 PM   6:20 PM
W113   LAB  
M T W R F    
Osagie, Usunobun  Vita
MVC
4
8/31/15
12/17/15
  eCampus
 
 The CADD Labs use Intel Dual Core Computers, networked with Windows 7 64 Bit operating system. All classes will be held with Video lectures and Demos. Lab time is required, but is not scheduled. Lab hours are from 9 a.m. until 9 p.m, Monday through Thursday and Fridays 9 a.m. until 4 p.m. This class will use AUTOCAD 2016
DFTG-1409  Basic Computer-Aided Drafting100% Online [INET]
DFTG-1409-91400 (988539)
Basic Computer-Aided Drafting
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Goitia, Tina  Vita
EFC/DCO
4
8/31/15
12/17/15
  eCampus
Internet Based
Class Request Form  
 DFTG 1409.41426 ONLINE course requires internet access. Introduction course to Computer Aided Drafting and Design. This course utilizes AutoDesk AutoCAD Software. Contact Tinagoitia@dcccd.edu for more information on this course.
DFTG-1409-91401 (988540)
Basic Computer-Aided Drafting
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Billingslea, Steven  Vita
MVC/DCO
4
8/31/15
12/17/15
  eCampus
Internet Based
Class Request Form  
 Students signed up for online classes will be sent an email on the first day of class with instructions and a video on how to log on and navigate eCampus. Students must have a valid email address. Students who do not enroll prior to the first day or do not receive an email on the first day must email the instructor at sbillingslea@dcccd.edu. Online students who would like to use the CADD Lab are welcome to during the posted hours.
DFTG-1417  Arch Drft ResdEastfield College [EFC]
DFTG-1417-41001 (975986)
Arch Drft Resd
L119   LEC  
M W   9:00 AM   9:55 AM
L119   LAB  
M W   10:00 AM   10:55 AM
TBA   LAB  
M T W R F    
Hutchins, Micheal  Vita
EFC
4
8/31/15
12/17/15
  eCampus
 
 NOTE: DFTG 1417.41001 This course utilizes AutoDesk AutoCAD Software. Additonal lab time is required but is not scheduled. Labs can be complete at home or during open lab hours. Contact MichealHutchins at 972-860-7681 or at MichealHutchins@dcccd.edu for more information on this course.
DFTG-1417-41426 (975989)
Arch Drft Resd
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Russell, Matthew  Vita
EFC
4
8/31/15
12/17/15
  eCampus
Internet Based
 
 NOTE: DFTG 1417.41426 ONLINE course requires internet access. This course utilizes AutoDesk AutoCAD Software. Contact Marques Washington at Marqueswashington@dcccd.edu or 972-860-7338 for more information on this course.
DFTG-1417  Arch Drft ResdMountain View College [MVC]
DFTG-1417-61280 (1006994)
Arch Drft Resd
TBA   LEC  
M T W R F   7:30 AM   8:30 AM
TBA   LAB  
M T W R F    
Alsabrook, Marissa  Vita
MVC
4
8/31/15
12/17/15
  eCampus
 
 For Duncanville HS Dual Credit students only
DFTG-1417-61281 (1007377)
Arch Drft Resd
TBA   LEC  
M T W R F   2:00 PM   3:00 PM
TBA   LAB  
M T W R F    
Alsabrook, Marissa  Vita
MVC
4
8/31/15
12/17/15
   
 For Duncanville HS Dual Credit students only
DFTG-1417-61400 (981774)
Arch Drft Resd
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Billingslea, Steven  Vita
MVC
4
8/31/15
12/17/15
  eCampus
Internet Based
 
 Students signed up for online classes will be sent an email on the first day of class with instructions and a video on how to log on and navigate eCampus. Students must have a valid email address. Students who do not enroll prior to the first day or do not receive an email on the first day must email the instructor at sbillingslea@dcccd.edu. Online students who would like to use the CADD Lab are welcome to during the posted hours. This class will use AUTOCAD 2016
DFTG-1417  Arch Drft Resd100% Online [INET]
DFTG-1417-91400 (988542)
Arch Drft Resd
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Billingslea, Steven  Vita
MVC/DCO
4
8/31/15
12/17/15
  eCampus
Internet Based
Class Request Form  
 Students signed up for online classes will be sent an email on the first day of class with instructions and a video on how to log on and navigate eCampus. Students must have a valid email address. Students who do not enroll prior to the first day or do not receive an email on the first day must email the instructor at sbillingslea@dcccd.edu. Online students who would like to use the CADD Lab are welcome to during the posted hours.
DFTG-1417-91401 (988541)
Arch Drft Resd
INET   INET  
M T W R F S U    
INET   LAB  
M T W F S U    
Russell, Matthew  Vita
EFC/DCO
4
8/31/15
12/17/15
  eCampus
Internet Based
Class Request Form  
 NOTE: DFTG 1417.41426 ONLINE course requires internet access. This course utilizes AutoDesk AutoCAD Softwre. Contact Marqueswashington@dcccd.edu or 972-860-7338 for more information on this course.
DFTG-1425  Blueprint Reading/SketchingMountain View College [MVC]
DFTG-1425-61250 (980359)
Blueprint Reading/Sketching
W113   LEC  
S   10:00 AM   11:50 AM
W113   LAB  
S    
Hoben, Bryan  Vita
MVC
4
8/31/15
12/17/15
  eCampus
 
DFTG-1445  Param Modeling & DesignEastfield College [EFC]
DFTG-1445-41001 (975993)
Param Modeling & Design
L118   LEC  
T R   10:00 AM   10:55 AM
L118   LAB  
T R   11:00 AM   11:30 AM
TBA   LAB  
M T W R F    
Washington, Marques  Vita
EFC
4
8/31/15
12/17/15
  eCampus
 
 NOTE: DFTG 1445.41001 This course utilizes Solidworks Software. Introduction course to Solidworks. Additional lab time is required but is not scheduled. Labs can be completed at home or during open lab hours. Contact Marqueswashington at Marqueswashington@dcccd.edu or 972-860-7338 for more information on this course.
DFTG-1445-41426 (976265)
Param Modeling & Design
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Washington, Marques  Vita
EFC
4
8/31/15
12/17/15
  eCampus
Internet Based
 
 NOTE: DFTG 1445. 41426 ONLINE course rquires internet access. Introduction course to Solidworks. Contact Marqueswashington at Marqueswashington@dcccd.edu or 972-860-7338 for more information on this course.
DFTG-1445-41501 (975995)
Param Modeling & Design
L118   LEC  
T R   7:05 PM   8:00 PM
L118   LAB  
T R   8:05 PM   8:25 PM
TBA   LAB  
M T W R F    
Washington, Marques  Vita
EFC
4
8/31/15
12/17/15
  eCampus
 
 NOTE: DFTG 1445.41501 This course utilizes Solidworks Software. Introduction course to Solidworks. Additional lab time is required but is not scheduled. Labs can be completed at home or during open lab hours. Contact Contact Marques Washington at Marqueswashington@dcccd.edu for more information on this course.
DFTG-1445  Param Modeling & DesignMountain View College [MVC]
DFTG-1445-61400 (981780)
Param Modeling & Design
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Billingslea, Steven  Vita
MVC
4
8/31/15
12/17/15
  eCampus
Internet Based
 
 Students signed up for online classes will be sent an email on the first day of class with instructions and a video on how to log on and navigate eCampus. Students must have a valid email address. Students who do not enroll prior to the first day or do not receive an email on the first day must email the instructor at sbillingslea@dcccd.edu. Online students who would like to use the CADD Lab are welcome to during the posted hours. This class will use Autodesk Inventor 2016 or SolidWorks 2015 Student's Choice)
DFTG-1445  Param Modeling & Design100% Online [INET]
DFTG-1445-91401 (988543)
Param Modeling & Design
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Washington, Marques  Vita
EFC/DCO
4
8/31/15
12/17/15
  eCampus
Internet Based
Class Request Form  
 NOTE: DFTG 1445. 41426 ONLINE course rquires interent access. Introduction course to Solidworks. Contact Marqueswashington@dcccd.edu or 972-860-7338 for more information on this course.
DFTG-1492  Special Topics DftgMountain View College [MVC]
DFTG-1492-61400 (1006910)
Special Topics Dftg
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Hoben, Bryan  Vita
MVC
4
8/31/15
12/17/15
  Internet Based
 
 Students signed up for online classes will be sent an email on the first day of class with instructions and a video on how to log on and navigate eCampus. Students must have a valid email address. Students who do not enroll prior to the first day or do not receive an email on the first day must email the instructor at sbillingslea@dcccd.edu. Online students who would like to use the CADD Lab are welcome to during the posted hours.
DFTG-1495  Spcl Tpcs in Mech DftgEastfield College [EFC]
DFTG-1495-41426 (976271)
Spcl Tpcs in Mech Dftg
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Washington, Marques  Vita
EFC
4
8/31/15
12/17/15
  eCampus
Internet Based
 
 NOTE: DFTG 1495.41426 First course in Autodesk Inventor. Additional lab time is required but is not scheduled. Labs can be completed at home or during open lab hours. Contact Marques Washington at Marqueswashington@dcccd.edu or 972-860-7338 for more information on this course.
DFTG-1495-41501 (976269)
Spcl Tpcs in Mech Dftg
L118   LEC  
M W   7:05 PM   8:00 PM
L118   LAB  
M W   8:05 PM   8:25 PM
Riddle, Kelly  Vita
EFC
4
8/31/15
12/17/15
  eCampus
 
 NOTE: DFTG 1495.41501 This course utilizes AutoDesk Inventor Software. First course in Autodesk Inventor. Additional lab time is required but is not scheduled. Labs can be completed at home or during open lab hours. Contact Marques Washington at Marqueswashington@dcccd.edu or 972-860-7338 for more information on this course.
DFTG-1495  Spcl Topic in Mech DftgMountain View College [MVC]
DFTG-1495-61400 (1002928)
Spcl Topic in Mech Dftg
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Billingslea, Steven  Vita
MVC
4
8/31/15
12/17/15
  eCampus
Internet Based
 
 Students signed up for online classes will be sent an email on the first day of class with instructions and a video on how to log on and navigate eCampus. Students must have a valid email address. Students who do not enroll prior to the first day or do not receive an email on the first day must email the instructor at sbillingslea@dcccd.edu. Online students who would like to use the CADD Lab are welcome to during the posted hours.
DFTG-1495  Spcl Tpcs in Mech Dftg100% Online [INET]
DFTG-1495-91400 (988548)
Spcl Tpcs in Mech Dftg
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Washington, Marques  Vita
EFC/DCO
4
8/31/15
12/17/15
  eCampus
Internet Based
Class Request Form  
 NOTE: DFTG 1495.41426 First course in Autodesk Inventor. Additional lab time is required but is not scheduled. Labs can be completed at home or during open lab hours. Contact Marqueswashington@dcccd.edu or 972-860-7338 for more information on this course.
DFTG-2321  Topographical DraftingMountain View College [MVC]
DFTG-2321-61400 (981781)
Topographical Drafting
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Billingslea, Steven  Vita
MVC
3
8/31/15
12/17/15
  eCampus
Internet Based
 
 Students signed up for online classes will be sent an email on the first day of class with instructions and a video on how to log on and navigate eCampus. Students must have a valid email address. Students who do not enroll prior to the first day or do not receive an email on the first day must email the instructor at sbillingslea@dcccd.edu. Online students who would like to use the CADD Lab are welcome to during the posted hours. This class will use AUTOCAD 2016
DFTG-2321  Topographical Drafting100% Online [INET]
DFTG-2321-91400 (988551)
Topographical Drafting
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Billingslea, Steven  Vita
MVC/DCO
3
8/31/15
12/17/15
  eCampus
Internet Based
Class Request Form  
 Students signed up for online classes will be sent an email on the first day of class with instructions and a video on how to log on and navigate eCampus. Students must have a valid email address. Students who do not enroll prior to the first day or do not receive an email on the first day must email the instructor at sbillingslea@dcccd.edu. Online students who would like to use the CADD Lab are welcome to during the posted hours.
DFTG-2332  Adv Computer-Adided DraftingRichland College [RLC]
DFTG-2332-81001 (983209)
Adv Computer-Adided Drafting
WH153   LEC  
M W   2:00 PM   2:55 PM
WH153   LAB  
M W   3:00 PM   4:50 PM
Fleming, Brian  Vita
RLC
3
8/31/15
12/17/15
  eCampus
 
 PreReq: DFTG 1309 Basic CAD/ Topic: AUTOCAD 2014 software used.
DFTG-2332-81930 (1027364)
Adv Computer-Aided Drafting
SCOCL   LEC  
M T W R F   12:35 PM   12:55 PM
SCOCL   LAB  
M T W R F   1:00 PM   1:25 PM
Moore, John  Vita
RLC
3
11/23/15
6/6/16
(16 weeks)
  eCampus
Flex Term Nov.
 
 Dual Credit Section 81930 meets 11/23/15 to 6/06/16 at Lake Highlands High School. Enrollment by petition only with Dual Credit Staff.
DFTG-2336  Cad ProgramminMountain View College [MVC]
DFTG-2336-61400 (981782)
Cad Programmin
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Hoben, Bryan  Vita
MVC
3
8/31/15
12/17/15
  eCampus
Internet Based
 
 Students signed up for online classes will be sent an email on the first day of class with instructions and a video on how to log on and navigate eCampus. Students must have a valid email address. Students who do not enroll prior to the first day or do not receive an email on the first day must email the instructor at sbillingslea@dcccd.edu. Online students who would like to use the CADD Lab are welcome to during the posted hours.
DFTG-2336  Cad Programmin100% Online [INET]
DFTG-2336-91400 (988552)
Cad Programmin
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Hoben, Bryan  Vita
MVC/DCO
3
8/31/15
12/17/15
  eCampus
Internet Based
Class Request Form  
 Students signed up for online classes will be sent an email on the first day of class with instructions and a video on how to log on and navigate eCampus. Students must have a valid email address. Students who do not enroll prior to the first day or do not receive an email on the first day must email the instructor at sbillingslea@dcccd.edu. Online students who would like to use the CADD Lab are welcome to during the posted hours.
DFTG-2380  Coop Ed Dftg/Desgn Tch/Tchn, GEastfield College [EFC]
DFTG-2380-41700 (976272)
Coop Ed Dftg/Desgn Tch/Tchn, G
TBA   LEC  
M T W R F S U    
TBA   COOP  
M T W R F S U    
Washington, Marques  Vita
EFC
3
8/31/15
12/17/15
  eCampus
 
 NOTE: DFTG 2380.41700 This course is for students who are currently employed in the CADD field. Contact Marques Washington at 972-860-7681 or at Marqueswashington@dcccd.edu for more information on this course.
DFTG-2402  Machine DraftingMountain View College [MVC]
DFTG-2402-61400 (981784)
Machine Drafting
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Rodriguez, Adolph  Vita
MVC
4
8/31/15
12/17/15
  eCampus
Internet Based
 
 Students signed up for online classes will be sent an email on the first day of class with instructions and a video on how to log on and navigate eCampus. Students must have a valid email address. Students who do not enroll prior to the first day or do not receive an email on the first day must email the instructor at sbillingslea@dcccd.edu. Online students who would like to use the CADD Lab are welcome to during the posted hours. This class will use Autodesk Inventor 2016 or SolidWorks 2015 Student's Choice)
DFTG-2402  Machine Drafting100% Online [INET]
DFTG-2402-91400 (988553)
Machine Drafting
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Rodriguez, Adolph  Vita
MVC/DCO
4
8/31/15
12/17/15
  eCampus
Internet Based
Class Request Form  
 Students signed up for online classes will be sent an email on the first day of class with instructions and a video on how to log on and navigate eCampus. Students must have a valid email address. Students who do not enroll prior to the first day or do not receive an email on the first day must email the instructor at sbillingslea@dcccd.edu. Online students who would like to use the CADD Lab are welcome to during the posted hours.
DFTG-2419  Intermed Computer Aided DftgEastfield College [EFC]
DFTG-2419-41426 (976279)
Intermed Computer Aided Dftg
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Goitia, Tina  Vita
EFC
4
8/31/15
12/17/15
  eCampus
Internet Based
 
 NOTE: DFTG 2419.41426 ONLINE course required internet access. This course utilizes AutoDesk AutoCAD Software. Contact Tina Goitia at Tinagoitia@dcccd.edu for more information on this course.
DFTG-2419-41501 (976276)
Intermed Computer Aided Dftg
L119   LEC  
T R   7:05 PM   8:00 PM
L119   LAB  
T R   8:05 PM   8:35 PM
TBA   LAB  
M T W R F    
Hutchins, Micheal  Vita
EFC
4
8/31/15
12/17/15
  eCampus
 
 NOTE: DFTG 2419.41501 This course utilizes AutoDesk AutoCAD. Additional lab time is required but is not scheduled. Labs can be completed at home or during open lab hours. Contact Micheal Hutchins at 972-860-7681 or at MichealHutchins@dcccd.edu for more information on this course.
DFTG-2419  Intermed Computer Aided DftgMountain View College [MVC]
DFTG-2419-61250 (980368)
Intermed Computer Aided Dftg
W113   LEC  
S   10:00 AM   11:50 AM
W113   LAB  
S    
Rodriguez, Adolph  Vita
MVC
4
8/31/15
12/17/15
  eCampus
 
 This class will use AUTOCAD 2016
DFTG-2419-61400 (981787)
Intermed Computer Aided Dftg
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Billingslea, Steven  Vita
MVC
4
8/31/15
12/17/15
  eCampus
Internet Based
 
 Students signed up for online classes will be sent an email on the first day of class with instructions and a video on how to log on and navigate eCampus. Students must have a valid email address. Students who do not enroll prior to the first day or do not receive an email on the first day must email the instructor at sbillingslea@dcccd.edu. Online students who would like to use the CADD Lab are welcome to during the posted hours. This class will use AUTOCAD 2016
DFTG-2419  Intermed Computer Aided Dftg100% Online [INET]
DFTG-2419-91400 (988556)
Intermed Computer Aided Dftg
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Goitia, Tina  Vita
EFC/DCO
4
8/31/15
12/17/15
  eCampus
Internet Based
Class Request Form  
 NOTE: DFTG 2419.41426 ONLINE course required internet access. This course utilizes AutoDesk AutoCAD Sottware. Contact Tinagoitia@dcccd.edu for more information on this course.
DFTG-2419-91401 (988557)
Intermed Computer Aided Dftg
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Billingslea, Steven  Vita
MVC/DCO
4
8/31/15
12/17/15
  eCampus
Internet Based
Class Request Form  
 Students signed up for online classes will be sent an email on the first day of class with instructions and a video on how to log on and navigate eCampus. Students must have a valid email address. Students who do not enroll prior to the first day or do not receive an email on the first day must email the instructor at sbillingslea@dcccd.edu. Online students who would like to use the CADD Lab are welcome to during the posted hours.
DFTG-2428  Architectural Dftg-CommercialEastfield College [EFC]
DFTG-2428-41426 (976281)
Architectural Dftg-Commercial
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Washington, Marques  Vita
EFC
4
8/31/15
12/17/15
  eCampus
Internet Based
 
 NOTE: DFTG 2428.41426 ONLINE course required internet access. This course utilizes AutoDesk Revit software. Contact Marques Washington at Marqueswashington@dcccd.edu or 972-860-7338 for more information on this course.
DFTG-2428-41501 (976280)
Architectural Dftg-Commercial
L118   LEC  
T R   5:35 PM   6:25 PM
L118   LAB  
T R   6:30 PM   7:00 PM
Washington, Marques  Vita
EFC
4
8/31/15
12/17/15
  eCampus
 
 NOTE: DFTG 2428.41501 Course utilizes Autodesk Revit software. Additional lab time is required but is not scheduled. Labs can be completed at home or during open lab hours. Contact Marques Washington at Marqueswashington@dcccd.edu or 972-860-7338 for more information on this course.
DFTG-2428  Architectural Dftg-CommercialMountain View College [MVC]
DFTG-2428-61400 (981789)
Architectural Dftg-Commercial
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Billingslea, Steven  Vita
MVC
4
8/31/15
12/17/15
  eCampus
Internet Based
 
 Students signed up for online classes will be sent an email on the first day of class with instructions and a video on how to log on and navigate eCampus. Students must have a valid email address. Students who do not enroll prior to the first day or do not receive an email on the first day must email the instructor at sbillingslea@dcccd.edu. Online students who would like to use the CADD Lab are welcome to during the posted hours. This class will use Revit 2016
DFTG-2428  Architectural Dftg-Commercial100% Online [INET]
DFTG-2428-91400 (988558)
Architectural Dftg-Commercial
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Washington, Marques  Vita
EFC/DCO
4
8/31/15
12/17/15
  eCampus
Internet Based
Class Request Form  
 NOTE: DFTG 2428.41426 ONLINE course required internet access. This course utilizes AutoDesk Revit software. Contact Marqueswashington@dcccd.edu or 972-860-7338 for more information on this course.
DFTG-2431  Adv Techn in Archit Dsgn/DftgEastfield College [EFC]
DFTG-2431-41426 (976282)
Adv Techn in Archit Dsgn/Dftg
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Washington, Marques  Vita
EFC
4
8/31/15
12/17/15
  eCampus
Internet Based
 
 NOTE: DFTG 2431.41426 ONLINE course requires internet access. This course utilizes AutoDesk Revit software. Contact Marques Washington at Marqueswashington@dcccd.edu or 972-860-7338 for more information on this course.
DFTG-2431  Adv Techn in Archit Dsgn/DftgMountain View College [MVC]
DFTG-2431-61280 (1007032)
Adv Techn in Archit Dsgn/Dftg
TBA   LEC  
M T W R F   7:30 AM   8:30 AM
TBA   LAB  
M T W R F    
Alsabrook, Marissa  Vita
MVC
4
8/31/15
12/17/15
  eCampus
 
 For Duncanville HS Dual Credit students only
DFTG-2431-61281 (1007034)
Adv Techn in Archit Dsgn/Dftg
TBA   LEC  
M T W R F   2:00 PM   3:00 PM
TBA   LAB  
M T W R F    
Alsabrook, Marissa  Vita
MVC
4
8/31/15
12/17/15
   
 For Duncanville HS Dual Credit students only
DFTG-2432  Adv Computer-Aided DraftingMountain View College [MVC]
DFTG-2432-61400 (981803)
Adv Computer-Aided Drafting
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Woodward, David  Vita
MVC
4
8/31/15
12/17/15
  eCampus
Internet Based
 
 Students signed up for online classes will be sent an email on the first day of class with instructions and a video on how to log on and navigate eCampus. Students must have a valid email address. Students who do not enroll prior to the first day or do not receive an email on the first day must email the instructor at sbillingslea@dcccd.edu. Online students who would like to use the CADD Lab are welcome to during the posted hours.
DFTG-2432  Adv Computer-Aided Drafting100% Online [INET]
DFTG-2432-91400 (988566)
Adv Computer-Aided Drafting
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Woodward, David  Vita
MVC/DCO
4
8/31/15
12/17/15
  eCampus
Internet Based
Class Request Form  
 Students signed up for online classes will be sent an email on the first day of class with instructions and a video on how to log on and navigate eCampus. Students must have a valid email address. Students who do not enroll prior to the first day or do not receive an email on the first day must email the instructor at sbillingslea@dcccd.edu. Online students who would like to use the CADD Lab are welcome to during the posted hours.
DFTG-2440  Solid Modeling/DesignEastfield College [EFC]
DFTG-2440-41426 (976283)
Solid Modeling/Design
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Washington, Marques  Vita
EFC
4
8/31/15
12/17/15
  eCampus
Internet Based
 
 NOTE: DFTG 2440.41426 ONLINE course requires internet access. This is the second course in Solidworks. Prerequisite course is DFTG 1445. Contact Marques Washington at Marqueswashington@dcccd.edu or 972-860-7338 for more information on this course.
ENTC-2381  Coop Ed - Engr Tech, GeneralRichland College [RLC]
ENTC-2381-81001 (986322)
Coop Ed - Engr Tech, General
C110   LEC  
M T W R F    
C110   COOP  
M T W R F    
Goldammer, Kory  Vita
RLC
3
8/31/15
12/17/15
  eCampus
 
 Reqd: Instructor approval prior to registration in addition to working minimum of 20 hrs per week in technical related position in Computer-Aided Design. See Technical Advisor to register/ Note: Time and day for on-campus seminar will be determined by instructor based upon student schedules. Mandatory orientation date and time TBA.
INMT-1319  Manufacturing ProcessesRichland College [RLC]
INMT-1319-81001 (986035)
Manufacturing Processes
WH153   LEC  
M W   11:00 AM   11:55 AM
WH153   LAB  
M W   12:00 PM   1:50 PM
Miller, Gregory  Vita
RLC
3
8/31/15
12/17/15
  eCampus
 
INMT-1319-81501 (986036)
Manufacturing Processes
WH129   LEC  
T R   5:40 PM   6:35 PM
WH129   LAB  
T R   6:40 PM   8:25 PM
Futch, Cecil  Vita
RLC
3
8/31/15
12/17/15
  eCampus
 
INMT-1343  Compu Aided Dsgn/Mfg(CAD/CAM)Eastfield College [EFC]
INMT-1343-41501 (979061)
Compu Aided Dsgn/Mfg(CAD/CAM)
T011   LEC  
M W   7:30 PM   8:30 PM
T011   LAB  
M W   8:35 PM   10:15 PM
Higgins, Larry  Vita
EFC
3
8/31/15
12/17/15
  eCampus
 
 NOTE: Prerequsite DFTG 1405 & MCHN 1301
INMT-1345  Computer Numerical ControlsEastfield College [EFC]
INMT-1345-41501 (979082)
Computer Numerical Controls
T107   LEC  
M W   6:00 PM   7:20 PM
TBA   LAB  
M T W R F S U    
Higgins, Larry  Vita
EFC
3
8/31/15
12/17/15
  eCampus
 
MCHN-1301  Beginning Machine ShopEastfield College [EFC]
MCHN-1301-41501 (979053)
Beginning Machine Shop
T010   LEC  
T R   7:00 PM   7:55 PM
T012   LAB  
T R   8:00 PM   9:55 PM
Denunzio, Rose  Vita
EFC
3
8/31/15
12/17/15
  eCampus
 
MCHN-1326  Intro Computer Aided ManufMountain View College [MVC]
MCHN-1326-61470 (997140)
Intro Computer Aided Manuf
W121E   LEC  
S   8:00 AM   12:00 PM
INET   LAB  
M T W R F S U    
Nguyen, Andy  Vita
MVC
3
8/31/15
12/17/15
  eCampus
 
 Students must meet the first class to determine times for Open Labs.
MCHN-1326  Intro Computer Aided ManufRichland College [RLC]
MCHN-1326-81501 (986236)
Intro Computer Aided Manuf
WH153   LEC  
M W   5:40 PM   6:10 PM
WH153   LAB  
M W   6:15 PM   9:00 PM
Fleming, Brian  Vita
RLC
3
8/31/15
12/17/15
  eCampus
 
 PreReq: DFTG 1309 Basic CAD/ Topic: MASTERCAM X8 software used. MILL I Professional Certification/ Note: This course replaces INMT 1343 CAD/CAM.
MCHN-1338  Basic Machine Shop IRichland College [RLC]
MCHN-1338-81902 (1006922)
Basic Machine Shop I
SCOCL   LEC  
M T W R F   9:55 AM   10:15 AM
SCOCL   LAB  
M T W R F   10:20 AM   10:45 AM
Morales, Max  Vita
RLC
3
8/24/15
12/18/15
(16 weeks)
  eCampus
Flex Term Aug.
 
 Dual Credit Section 81902 meets 8/24/15 to 12/18/15 at Richardson High School. Enrollment by petition only with Dual Credit Staff.
MCHN-1338-81904 (1006928)
Basic Machine Shop I
SCOCL   LEC  
M T W R F   12:30 PM   12:55 PM
SCOCL   LAB  
M T W R F   1:00 PM   1:25 PM
Morales, Max  Vita
RLC
3
8/24/15
12/18/15
(16 weeks)
  eCampus
Flex Term Aug.
 
 Dual Credit Section 81904 meets 8/24/15 to 12/18/15 at Richardson High School. Enrollment by petition only with Dual Credit Staff.
MCHN-1343  Machine Shop MathematicsEastfield College [EFC]
MCHN-1343-41501 (979055)
Machine Shop Mathematics
T010   LEC  
T R   6:00 PM   6:55 PM
T010   LAB  
T R    
Denunzio, Rose  Vita
EFC
3
8/31/15
12/17/15
  eCampus
 
MCHN-1438  Basic Machine Shop IMountain View College [MVC]
MCHN-1438-61471 (997133)
Basic Machine Shop I
W121E   LEC  
M W   9:05 AM   11:05 AM
INET   LAB  
M T W R F S U    
Vu, Tuan  Vita
MVC
4
8/31/15
12/17/15
  eCampus
 
 Students must meet the first class to determine times for Open Labs.
MCHN-1438-61470 (997130)
Basic Machine Shop I
W121E   LEC  
S   8:00 AM   10:00 AM
INET   LAB  
M T W R F S U    
Vu, Tuan  Vita
MVC
4
8/31/15
12/17/15
  eCampus
 
 Students must meet the first class to determine times for Open Labs.
MCHN-1438-61472 (997135)
Basic Machine Shop I
W121E   LEC  
T R   6:00 PM   7:55 PM
INET   LAB  
M T W R F S U    
Vu, Tuan  Vita
MVC
4
8/31/15
12/17/15
  eCampus
 
MCHN-1454  Intermediate Machining IIEastfield College [EFC]
MCHN-1454-41501 (979057)
Intermediate Machining II
T010   LEC  
M W   6:00 PM   6:55 PM
T012   LAB  
M W   7:00 PM   9:55 PM
Denunzio, Rose  Vita
EFC
4
8/31/15
12/17/15
  eCampus
 
 NOTE: MCHN 1454.41501 Prerequisite: MCHN 1301.
MCHN-1454  Intermediate Machining IIMountain View College [MVC]
MCHN-1454-61470 (983464)
Intermediate Machining II
W121E   LEC  
S   8:00 AM   3:30 PM
INET   LAB  
M T W R F S U    
Vu, Tuan  Vita
MVC
4
8/31/15
12/17/15
  eCampus
 
 Students must meet the first class to determine times for Open Labs.
MCHN-2335  Advanced CNC MachiningRichland College [RLC]
MCHN-2335-81501 (986239)
Advanced CNC Machining
WH129   LEC  
M W   5:40 PM   6:10 PM
WH129   LAB  
M W   6:15 PM   9:00 PM
Fleming, Brian  Vita
RLC
3
8/31/15
12/17/15
  eCampus
 
 PreReq: MCHN 1326 Intro CAM/ Topic: Multi-Axis; MASTERCAM X8 software used.
MCHN-2338  Adv Computer-Aided Mfg (CAM)Eastfield College [EFC]
MCHN-2338-41426 (979078)
Adv Computer-Aided Mfg (CAM)
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Denunzio, Rose  Vita
EFC
3
8/31/15
12/17/15
  eCampus
Internet Based
 
 NOTE: INMT 2338.41426 ONLINE requires interent access. This course utilizes MasterCAM software which is included with the text. Contact Rose DeNunzio at rosedenunzio@dcccd.edu for information about this course. *Prerequisite INMT 1343.
MCHN-2338  Adv Computer-Aided Mfg (CAM)Richland College [RLC]
MCHN-2338-81501 (986243)
Adv Computer-Aided Mfg (CAM)
WH129   LEC  
M W   5:40 PM   6:10 PM
WH129   LAB  
M W   6:15 PM   9:00 PM
Fleming, Brian  Vita
RLC
3
8/31/15
12/17/15
  eCampus
 
 PreReq: DFTG 2332, MCHN 1326/ Topic: Multi-Axis; MASTERCAM X8 software used.
MCHN-2441  Advanced Machining IEastfield College [EFC]
MCHN-2441-41501 (990945)
Advanced Machining I
T010   LEC  
M W   6:00 PM   6:55 PM
T012   LAB  
M W   7:00 PM   9:55 PM
Denunzio, Rose  Vita
EFC
4
8/31/15
12/17/15
  eCampus
 
 NOTE: Prerequsite MCHN 1454
 
 
Close
Our Colleges