Fall 2016 Credit - Engineering Technology

 

See Engineering Technology Classes for
| Richland | 100% Online Classes |

Night classes listed in shaded color
Controlled enrollment classes listed in shaded color
Course-Num-Sect(Reg#)
Title
Class Meeting
Information
Faculty Loc
Credits
Start/End
Date
Co-req
Sections
Class
Features
ARCE-1303  Arch Mat/Methods of ConstructEastfield College [EFC]
ARCE-1303-41426 (1041171)
Arch Mat/Methods of Construct
INET   INET  
M T W R F S U    
Russell, Matthew  Vita
EFC
3
8/29/16
12/15/16
  eCampus
Internet Based
 
 Note: ARCE 1303.41426 ONLINE. Requires MS Word & internet access. This course utilizes AutoDesk AutoCAD software. For more information contact Marques Washington at MarquesWashington@dcccd.edu.
ARCE-1303  Arch Mat/Methods of Construct100% Online [INET]
ARCE-1303-91400 (1051493)
Arch Mat/Methods of Construct
INET   INET  
M T W R F S U    
Russell, Matthew  Vita
EFC/DCO
3
8/29/16
12/15/16
  Internet Based
Class Request Form  
 Note: ARCE 1303.41426 ONLINE. Requires MS Word & internet access. This course utilizes AutoDesk AutoCAD software. For more information contact Marques Washington at MarquesWashington@dcccd.edu.
ARCE-1421  Architectural IllustrationEastfield College [EFC]
ARCE-1421-41426 (1041200)
Architectural Illustration
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Goitia, Tina  Vita
EFC
4
8/29/16
12/15/16
  eCampus
Internet Based
 
 Note: ARCE 1421.41426. ONLINE. Course requires internet access. This course utilizes AutoDesk AutoCAD software. Contact Tina Goitia at tinagoitia@dcccd.edu for more information on this course.
ARCE-1421  Architectural IllustrationMountain View College [MVC]
ARCE-1421-61280 (1066928)
Architectural Illustration
TBA   LEC  
M W F   10:18 AM   11:48 AM
TBA   LAB  
M W F    
Alsabrook, Marissa  Vita
MVC
4
8/29/16
12/15/16
  eCampus
 
 For Duncanville HS Dual Credit students only
ARCE-1421-61281 (1066940)
Architectural Illustration
TBA   LEC  
M W F   12:25 PM   1:55 PM
TBA   LAB  
M W F    
Alsabrook, Marissa  Vita
MVC
4
8/29/16
12/15/16
  eCampus
 
 For Duncanville HS Dual Credit students only
ARCE-1421-61282 (1066941)
Architectural Illustration
TBA   LEC  
T R   8:30 AM   10:10 AM
TBA   LAB  
T R    
Alsabrook, Marissa  Vita
MVC
4
8/29/16
12/15/16
  eCampus
 
 For Duncanville HS Dual Credit students only
ARCE-1421-61283 (1066944)
Architectural Illustration
TBA   LEC  
T R   10:18 AM   11:48 AM
TBA   LAB  
T R    
Alsabrook, Marissa  Vita
MVC
4
8/29/16
12/15/16
  eCampus
 
 For Duncanville HS Dual Credit students only
ARCE-1421-61400 (1054829)
Architectural Illustration
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Billingslea, Steven  Vita
MVC
4
8/29/16
12/15/16
  eCampus
Internet Based
 
 Students signed up for online classes will be sent an email on the first day of class with instructions and a video on how to log on and navigate eCampus. Students must have a valid email address. Students who do not enroll prior to the first day or do not receive an email on the first day must email the instructor at sbillingslea@dcccd.edu. Online students who would like to use the CADD Lab are welcome to during the posted hours.
ARCE-1421-61475 (1054156)
Architectural Illustration
W113   LEC  
M W   5:30 PM   6:20 PM
INET   LAB  
M T W R F S U    
Woodward, David  Vita
MVC
4
8/29/16
12/15/16
  eCampus
 
 The CADD Labs use Intel Dual Core Computers, networked with Windows 7 64 Bit operating system. All classes will be held with Video lectures and Demos. Lab time is required, but is not scheduled. Lab hours are from 9 a.m. until 9 p.m, Monday through Thursday and Fridays 9 a.m. until 4 p.m. These classes will use AutoDesk software and SolidWorks.
ARCE-1421  Architectural Illustration100% Online [INET]
ARCE-1421-91400 (1051495)
Architectural Illustration
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Goitia, Tina  Vita
EFC/DCO
4
8/29/16
12/15/16
  Internet Based
Class Request Form  
 Note: ARCE 1421.41426. ONLINE. Course requires internet access. This course utilizes AutoDesk AutoCAD software. Contact Tina Goitia at tinagoitia@dcccd.edu for more information on this course.
ARCE-1421-91401 (1057874)
Architectural Illustration
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Billingslea, Steven  Vita
MVC/DCO
4
8/29/16
12/15/16
  eCampus
Internet Based
Class Request Form  
 Students signed up for online classes will be sent an email on the first day of class with instructions and a video on how to log on and navigate eCampus. Students must have a valid email address. Students who do not enroll prior to the first day or do not receive an email on the first day must email the instructor at sbillingslea@dcccd.edu. Online students who would like to use the CADD Lab are welcome to during the posted hours.
CETT-1357  Linear Integrated CircuitsRichland College [RLC]
CETT-1357-81001 (1061474)
Linear Integrated Circuits
WH127   LEC  
M   8:00 AM   10:50 AM
WH127   LAB  
T   8:00 AM   10:50 AM
Kohan, Stanford  Vita
RLC
3
8/29/16
12/15/16
   
 PreReq: CETT 1429/ Note: Course is cross-listed with CETT 1457. Students may register for either CETT 1457 or 1357 but will receive credit for only one of the two.
CETT-1403  DC CircuitsEastfield College [EFC]
CETT-1403-41001 (1039156)
DC Circuits
L107   LEC  
M   10:50 AM   1:30 PM
L107   LAB  
W   10:50 AM   1:30 PM
Rawlins, John  Vita
EFC
4
8/29/16
12/15/16
  eCampus
 
CETT-1403-41311 (1074923)
DC Circuits
TBA   LEC  
M T W R F   9:06 AM   10:36 AM
TBA   LAB  
M T W R F    
Miller, Amber  Vita
EFC
4
8/22/16
12/15/16
(17 weeks)
  eCampus
Flex Term Aug.
 
 Dual Credit Students for Garland High Schools. Students are on an A & B schedule
CETT-1403-41312 (1074932)
DC Circuits
TBA   LEC  
M T W R F   10:42 AM   12:12 PM
TBA   LAB  
M T W R F    
Miller, Amber  Vita
EFC
4
8/22/16
12/15/16
(17 weeks)
  eCampus
Flex Term Aug.
 
 South Garland High School dual credit students only. Students are on an A & B schedule.
CETT-1403-41958 (1066552)
DC Circuits
TBA   LEC  
M T W R F   2:30 PM   4:15 PM
TBA   LAB  
M T W R F    
Dale, Russell  Vita
EFC
4
8/22/16
12/22/16
(18 weeks)
  eCampus
Flex Term Aug.
 
 Dual Credit - H. Grady Spruce High School Students Only
CETT-1403-41501 (1039157)
DC Circuits
L100   LEC  
M   5:20 PM   8:00 PM
L107   LAB  
W   5:20 PM   8:00 PM
Dale, Russell  Vita
EFC
4
8/29/16
12/15/16
  eCampus
 
CETT-1403-41701 (1066222)
DC Circuits
TBA   LEC  
M T W R F S U    
TBA   LAB  
M T W R F S U    
Dye, Arch  Vita
EFC
4
8/30/16
12/14/16
(16 weeks)
  eCampus
Flex Term Aug.
 
 This section is for AT&T employees only.
CETT-1403  DC CircuitsMountain View College [MVC]
CETT-1403-61280 (1077300)
DC Circuits
TBA   LEC  
M W F   10:50 AM   1:55 PM
INET   LAB  
M T W R F S U    
Gray, Bobby  Vita
MVC
4
8/29/16
12/15/16
  eCampus
 
 For Duncanville HS Dual Credit only
CETT-1403-61470 (1058701)
DC Circuits
W107C   LEC  
T R   9:30 AM   10:50 AM
INET   LAB  
M T W R F S U    
Green, Tommy  Vita
MVC
4
8/29/16
12/15/16
  eCampus
 
CETT-1403-61400 (1058700)
DC Circuits
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Green, Tommy  Vita
MVC
4
8/29/16
12/15/16
  eCampus
Internet Based
 
 Go to http://ecampus.dcccd.edu for course syllabus, assignments, and instructor information on the first day of class.
CETT-1403  DC CircuitsRichland College [RLC]
CETT-1403-81002 (1051793)
DC Circuits
WH163   LEC  
M   11:00 AM   1:50 PM
WH163   LAB  
T   11:00 AM   1:50 PM
Goldammer, Kory  Vita
RLC
4
8/29/16
12/15/16
  eCampus
 
CETT-1403-81950 (1051799)
DC Circuits
WH165   LEC  
M   1:00 PM   4:00 PM
WH165   LAB  
W   1:00 PM   4:00 PM
Francis, Jay  Vita
RLC
4
8/24/16
12/14/16
(17 weeks)
  eCampus
Flex Term Aug.
 
 Dual Credit Section 81950 meets 8/24-12/14/ Note: For Conrad High School students only. Enrollment by petition only with Dual Credit staff.
CETT-1403-81001 (1051787)
DC Circuits
WH163   LEC  
R   8:00 AM   10:50 AM
WH163   LAB  
F   8:00 AM   10:50 AM
Houle, Stephen  Vita
RLC
4
8/29/16
12/15/16
  eCampus
 
CETT-1403-81400 (1061478)
DC Circuits
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Farcasiu, Simona  Vita
RLC
4
8/29/16
12/15/16
  eCampus
Internet Based
 
 Delivery: Online. No on-campus meetings/ Reqd: Log on to http://ecampus.dcccd.edu
CETT-1403-81501 (1051813)
DC Circuits
WH163   LEC  
T   5:40 PM   8:25 PM
WH163   LAB  
R   5:40 PM   8:25 PM
Bradbury, James  Vita
RLC
4
8/29/16
12/15/16
  eCampus
 
CETT-1405  Ac CircuitsEastfield College [EFC]
CETT-1405-41501 (1039159)
Ac Circuits
L107   LEC  
T   5:20 PM   8:00 PM
L107   LAB  
R   5:20 PM   8:00 PM
Miller, Amber  Vita
EFC
4
8/29/16
12/15/16
  eCampus
 
CETT-1405-41701 (1066223)
Ac Circuits
TBA   LEC  
M T W R F S U    
TBA   LAB  
M T W R F S U    
Dye, Arch  Vita
EFC
4
8/30/16
12/14/16
(16 weeks)
  eCampus
Flex Term Aug.
 
 This section is for AT&T employees only.
CETT-1405  Ac CircuitsMountain View College [MVC]
CETT-1405-61470 (1058708)
Ac Circuits
W107C   LEC  
T R   11:00 AM   12:20 PM
INET   LAB  
M T W R F S U    
Green, Tommy  Vita
MVC
4
8/29/16
12/15/16
  eCampus
 
CETT-1405-61400 (1058707)
Ac Circuits
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Green, Tommy  Vita
MVC
4
8/29/16
12/15/16
  eCampus
Internet Based
 
 Go to http://ecampus.dcccd.edu for course syllabus, assignments, and instructor information on the first day of class.
CETT-1405  Ac CircuitsRichland College [RLC]
CETT-1405-81002 (1051819)
Ac Circuits
WH163   LEC  
T   2:00 PM   4:50 PM
WH163   LAB  
R   2:00 PM   4:50 PM
Farcasiu, Simona  Vita
RLC
4
8/29/16
12/15/16
  eCampus
 
 PreReq: CETT 1403
CETT-1425  Digital FundamentalsEastfield College [EFC]
CETT-1425-41001 (1039160)
Digital Fundamentals
L100   LEC  
T   8:00 AM   10:40 AM
L100   LAB  
R   8:00 AM   10:40 AM
Dye, Arch  Vita
EFC
4
8/29/16
12/15/16
  eCampus
 
CETT-1425-41311 (1074942)
Digital Fundamentals
TBA   LEC  
M T W R F   9:06 AM   10:36 AM
TBA   LAB  
M T W R F    
Miller, Amber  Vita
EFC
4
8/29/16
12/15/16
  eCampus
 
 South Garland High School dual credit students only. Students are on an A & B schedule.
CETT-1425-41501 (1039161)
Digital Fundamentals
L100   LEC  
T   5:20 PM   8:00 PM
L100   LAB  
R   5:20 PM   8:00 PM
Dye, Arch  Vita
EFC
4
8/29/16
12/15/16
  eCampus
 
CETT-1425-41701 (1066224)
Digital Fundamentals
TBA   LEC  
M T W R F S U    
TBA   LAB  
M T W R F S U    
Miller, Amber  Vita
EFC
4
8/30/16
10/20/16
(8 weeks)
  eCampus
Flex Term Aug.
 
 This section is restricted to AT&T employees only
CETT-1425  Digital FundamentalsMountain View College [MVC]
CETT-1425-61470 (1058712)
Digital Fundamentals
W107C   LEC  
M W   11:00 AM   12:20 PM
INET   LAB  
M T W R F S U    
Green, Tommy  Vita
MVC
4
8/29/16
12/15/16
  eCampus
 
CETT-1425  Digital FundamentalsRichland College [RLC]
CETT-1425-81001 (1051832)
Digital Fundamentals
WH165   LEC  
R   8:00 AM   10:50 AM
WH165   LAB  
F   8:00 AM   10:50 AM
Bradbury, James  Vita
RLC
4
8/29/16
12/15/16
  eCampus
 
CETT-1425-81890 (1087009)
Digital Fundamentals
TBA   LEC  
M T W R F   2:45 PM   4:15 PM
TBA   LAB  
W   8:15 AM   9:00 AM
Strong, Eric  Vita
RLC
4
10/24/16
5/24/17
(16 weeks)
  eCampus
Flex Term Oct.
 
 Dual Credit Section 81890 meets 10/24/16-05/24/17 at Townview High School. Enrollment by petition only with Dual Credit Staff.
CETT-1429  Solid State DevicesEastfield College [EFC]
CETT-1429-41501 (1039320)
Solid State Devices
L107   LEC  
T   8:05 PM   10:45 PM
L107   LAB  
R   8:05 PM   10:45 PM
Dodson, James  Vita
EFC
4
8/29/16
12/15/16
  eCampus
 
CETT-1429-41701 (1066225)
Solid State Devices
TBA   LEC  
M T W R F S U    
TBA   LAB  
M T W R F S U    
Dye, Arch  Vita
EFC
4
8/30/16
10/20/16
(8 weeks)
  eCampus
Flex Term Aug.
 
 This section is restricted to AT&T employees only
CETT-1429  Solid State DevicesMountain View College [MVC]
CETT-1429-61470 (1058713)
Solid State Devices
W107C   LEC  
M W   9:30 AM   10:50 AM
INET   LAB  
M T W R F S U    
Green, Tommy  Vita
MVC
4
8/29/16
12/15/16
  eCampus
 
CETT-1441  Solid State CircuitsEastfield College [EFC]
CETT-1441-41001 (1039357)
Solid State Circuits
L107   LEC  
T   8:00 AM   10:40 AM
L107   LAB  
R   8:00 AM   10:40 AM
Rawlins, John  Vita
EFC
4
8/29/16
12/15/16
  eCampus
 
CETT-1441-41501 (1039388)
Solid State Circuits
L100   LEC  
W   5:20 PM   8:00 PM
L107   LAB  
M   5:20 PM   8:00 PM
Cowart, Michael  Vita
EFC
4
8/29/16
12/15/16
  eCampus
 
CETT-1449  Digital SystemsEastfield College [EFC]
CETT-1449-41001 (1039405)
Digital Systems
L106   LEC  
M   10:50 AM   1:30 PM
L106   LAB  
W   10:50 AM   1:30 PM
Dye, Arch  Vita
EFC
4
8/29/16
12/15/16
  eCampus
 
CETT-1449-41501 (1039418)
Digital Systems
L106   LEC  
T   8:05 PM   10:45 PM
L106   LAB  
R   8:05 PM   10:45 PM
Dye, Arch  Vita
EFC
4
8/29/16
12/15/16
  eCampus
 
CETT-1457  Linear Integrated CircuitsRichland College [RLC]
CETT-1457-81001 (1051837)
Linear Integrated Circuits
WH127   LEC  
M   8:00 AM   10:50 AM
WH127   LAB  
T   8:00 AM   10:50 AM
Kohan, Stanford  Vita
RLC
4
8/29/16
12/15/16
  eCampus
 
 PreReq: CETT 1429/ Note: Course is cross-listed with CETT 1357. Students may register for either CETT 1457 or 1357 but will receive credit for only one of the two.
CETT-2480  Cooperative Education-ComputerEastfield College [EFC]
CETT-2480-41001 (1039551)
Cooperative Education-Computer
INET   INET  
M T W R F S U    
INET   COOP  
M T W R F S U    
Rawlins, John  Vita
EFC
4
8/29/16
12/15/16
  eCampus
Internet Based
 
 Note: CETT 2480.41001 Co-op ORIENTATION: Contact Clay Rawlins at 972-860-7670 in L103 during first week of class. You must work at least 20 hours per week in an electronics related industry to participate in this course.
DFTG-1309  Basic Computer-Aided DraftingRichland College [RLC]
DFTG-1309-81002 (1051850)
Basic Computer-Aided Drafting
WH153   LEC  
M W   8:00 AM   8:55 AM
WH153   LAB  
M W   9:00 AM   10:50 AM
Manouchehripour, Muhammed  Vita
RLC
3
8/29/16
12/15/16
  eCampus
 
 Topic: AUTOCAD 2016 software used.
DFTG-1309-81965 (1087237)
Basic Computer-Aided Drafting
TBA   LEC  
M W   10:45 AM   12:15 PM
TBA   LAB  
M W   12:20 PM   12:55 PM
Ortley, Lester  Vita
RLC
3
10/24/16
6/5/17
(16 weeks)
  eCampus
Flex Term Oct.
 
 Dual Credit Section 81965 meets 10/24/16 to 6/05/17 at North Garland High School. Enrollment by petition only with Dual Credit Staff
DFTG-1309-81001 (1051844)
Basic Computer-Aided Drafting
WH153   LEC  
T R   11:00 AM   11:55 AM
WH153   LAB  
T R   12:00 PM   1:50 PM
Zipper, Patricia  Vita
RLC
3
8/29/16
12/15/16
  eCampus
 
 Topic: AUTOCAD 2016 software used.
DFTG-1309-81930 (1088202)
Basic Computer-Aided Drafting
SCOCL   LEC  
M T W R F   10:54 AM   11:19 AM
SCOCL   LAB  
M T W R F   11:20 AM   11:44 AM
Moore, John  Vita
RLC
3
11/2/16
5/17/17
(16 weeks)
  Flex Term Nov.
 
 Dual Credit Section 81930 meets 11/2/16 to 06/05/17 at Lake Highlands High School. Enrollment by petition only with Dual Credit Staff.
DFTG-1309-81931 (1089672)
Basic Computer-Aided Drafting
TBA   LEC  
M T W R F   10:54 AM   11:19 AM
TBA   LAB  
M T W R F   11:20 AM   11:44 AM
Moore, John  Vita
RLC
3
11/18/16
6/5/17
(16 weeks)
  Flex Term Nov.
 
 Dual Credit Section 81931 meets 11/18/16 to 06/05/17 at Lake Highlands High School. Enrollment by petition only with Dual Credit Staff.
DFTG-1309-81400 (1051860)
Basic Computer-Aided Drafting
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Fleming, Brian  Vita
RLC
3
8/29/16
12/15/16
  eCampus
Internet Based
 
 Delivery: Online. No on-campus meetings/ Reqd: Log on to http://ecampus.dcccd.edu/ Topic: AUTOCAD 2010 or later required. AUTOCAD LT cannot be used.
DFTG-1309-81501 (1051855)
Basic Computer-Aided Drafting
WH153   LEC  
T R   5:40 PM   6:35 PM
WH153   LAB  
T R   6:40 PM   8:25 PM
Manouchehripour, Muhammed  Vita
RLC
3
8/29/16
12/15/16
  eCampus
 
 Topic: AUTOCAD 2016 software used.
DFTG-1309  Basic Computer-Aided Drafting100% Online [INET]
DFTG-1309-91400 (1058143)
Basic Computer-Aided Drafting
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Fleming, Brian  Vita
RLC/DCO
3
8/29/16
12/15/16
  Internet Based
Class Request Form  
 Delivery: Online. No on-campus meetings/ Reqd: Log on to http://ecampus.dcccd.edu/ Topic: AUTOCAD 2010 or later required. AUTOCAD LT cannot be used.
DFTG-1315  Architectural Blueprint ReadinEastfield College [EFC]
DFTG-1315-41426 (1059632)
Architectural Blueprint Readin
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Russell, Matthew  Vita
EFC
3
8/29/16
12/15/16
  eCampus
Internet Based
 
 Note: This course is online. It requires internet access. Blueprints in this course cover Architectural Drawings. For more information on this course contact Marques Washington at Marques Washington@dcccd.edu or 972-860-7338.
DFTG-1325  Blueprint Reading & SketchingEastfield College [EFC]
DFTG-1325-41426 (1041206)
Blueprint Reading & Sketching
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Washington, Marques  Vita
EFC
3
8/29/16
12/15/16
  eCampus
Internet Based
 
 Note: DFTG 1325.41426. Course requires MS Word and internet access. Blueprints in this course cover Mechanical/Machine parts. Contact Marques Washington at Marques Washington@dcccd.edu or 972-860-7338 for more information on this courses.
DFTG-1325  Blueprint Reading & Sketching100% Online [INET]
DFTG-1325-91400 (1052977)
Blueprint Reading & Sketching
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Washington, Marques  Vita
EFC/DCO
3
8/29/16
12/15/16
  eCampus
Internet Based
Class Request Form  
 Note: DFTG 1325.91400. Course requires MS Word and internet access. Blueprints in this course cover Mechanical/Machine parts. Contact Marques Washington at Marques Washington@dcccd.edu or 972-860-7338 for more information on this courses.
DFTG-1329  Elec-Mech DrftEastfield College [EFC]
DFTG-1329-41426 (1041218)
Elec-Mech Drft
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Washington, Marques  Vita
EFC
3
8/29/16
12/15/16
  eCampus
Internet Based
 
 Note: DFTG 1329.41426. ONLINE. Course requires internet access. This course utilizes AutoDesk AutoCAD. Contact Marques Washington at marqueswashington@dcccd.edu for more information on the course.
DFTG-1329  Elec-Mech Drft100% Online [INET]
DFTG-1329-91400 (1053019)
Elec-Mech Drft
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Washington, Marques  Vita
EFC/DCO
3
8/29/16
12/15/16
  eCampus
Internet Based
Class Request Form  
 Note: DFTG 1329.91400. ONLINE. Course requires internet access. This course utilizes AutoDesk AutoCAD. Contact Marques Washington at marqueswashington@dcccd.edu for more information on the course.
DFTG-1340  Intro to Cad SystemsEastfield College [EFC]
DFTG-1340-41426 (1041228)
Intro to Cad Systems
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Hutchins, Micheal  Vita
EFC
3
8/29/16
12/15/16
  eCampus
Internet Based
 
 Note: DFTG 1340.41426. ONLINE. Course requires internet access. Coursework revolves around the introduction to computers and software. If you need an AutoCAD drawing course, please register for DFTG 1405 or DFTG 1409. Contact: Micheal Hutchins at MichealHutchins@dcccd.edu or 972-860-7681 for more information on this course.
DFTG-1340  Intro to Cad Systems100% Online [INET]
DFTG-1340-91400 (1053024)
Intro to Cad Systems
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Hutchins, Micheal  Vita
EFC/DCO
3
8/29/16
12/15/16
  eCampus
Internet Based
Class Request Form  
 Note: DFTG 1340.91400. ONLINE. Course requires internet access. Coursework revolves around the introduction to computers and software. If you need an AutoCAD drawing course, please register for DFTG 1405 or DFTG 1409. Contact: Micheal Hutchins at MichealHutchins@dcccd.edu or 972-860-7681 for more information on this course.
DFTG-1345  Parametric Modeling & DesignRichland College [RLC]
DFTG-1345-81001 (1063439)
Parametric Modeling & Design
WH153   LEC  
F   10:00 AM   12:00 PM
WH153   LAB  
F   12:05 PM   5:00 PM
Miller, James  Vita
RLC
3
8/29/16
12/15/16
  eCampus
 
 Topic: AUTOCAD 2016 software used/ Note: No class 11/25.
DFTG-1405  Technical DraftingEastfield College [EFC]
DFTG-1405-41292 (1076730)
Technical Drafting
TBA   LEC  
T R   11:30 AM   12:25 PM
TBA   LAB  
T R   12:26 PM   1:05 PM
TBA   LAB  
F   11:30 AM   1:00 PM
Washington, Marques  Vita
EFC
4
8/29/16
12/15/16
  eCampus
 
 Dual Credit Skyline High School students only. A, B schedule
DFTG-1405-41426 (1041240)
Techn Drafting
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Goitia, Tina  Vita
EFC
4
8/29/16
12/15/16
  eCampus
Internet Based
 
 Note: DFTG 1405.41426. ONLINE. Course requires internet access. This course utilizes AutoDesk AutoCAD software. Introduction course to Computer Aided Drafting and Design and Pencil Sketching. Contact: Tina Goitia at TinaGoitia@dcccd.edu for more information on this course.
DFTG-1405-41501 (1041244)
Techn Drafting
L118   LEC  
M W   5:35 PM   6:30 PM
L118   LAB  
M W   6:35 PM   7:00 PM
TBA   LAB  
M T W R F S U    
Riddle, Kelly  Vita
EFC
4
8/29/16
12/15/16
  eCampus
 
 Note: DFTG 1405.41501. This course utilizes AutoDesk AutoCAD software. Introduction course to Computer Aided Drafting and Design and Pencil Sketching. Additional lab time is required, but not scheduled. Labs can be completed at home or during open lab hours. Contact: Marques Washington at MarquesWashington@dcccd.edu or 972-860-7338 for more information on this course.
DFTG-1405  Technical DraftingMountain View College [MVC]
DFTG-1405-61470 (1054118)
Technical Drafting
W113   LEC  
T R   11:00 AM   11:50 AM
INET   LAB  
M T W R F S U    
Billingslea, Steven  Vita
MVC
4
8/29/16
12/15/16
  eCampus
 
 The CADD Labs use Intel Dual Core Computers, networked with Windows 7 64 Bit operating system. All classes will be held with Video lectures and Demos. Lab time is required, but is not scheduled. Lab hours are from 9 a.m. until 9 p.m, Monday through Thursday and Fridays 9 a.m. until 4 p.m. These classes will use AutoDesk software and SolidWorks.
DFTG-1405-61400 (1054875)
Technical Drafting
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Billingslea, Steven  Vita
MVC
4
8/29/16
12/15/16
  eCampus
Internet Based
 
 Students signed up for online classes will be sent an email on the first day of class with instructions and a video on how to log on and navigate eCampus. Students must have a valid email address. Students who do not enroll prior to the first day or do not receive an email on the first day must email the instructor at sbillingslea@dcccd.edu. Online students who would like to use the CADD Lab are welcome to during the posted hours.
DFTG-1405-61475 (1054164)
Technical Drafting
W113   LEC  
M W   5:30 PM   6:20 PM
INET   LAB  
M T W R F S U    
Woodward, David  Vita
MVC
4
8/29/16
12/15/16
  eCampus
 
 The CADD Labs use Intel Dual Core Computers, networked with Windows 7 64 Bit operating system. All classes will be held with Video lectures and Demos. Lab time is required, but is not scheduled. Lab hours are from 9 a.m. until 9 p.m, Monday through Thursday and Fridays 9 a.m. until 4 p.m. These classes will use AutoDesk software and SolidWorks.
DFTG-1405  Techn Drafting100% Online [INET]
DFTG-1405-91400 (1053028)
Techn Drafting
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Goitia, Tina  Vita
EFC/DCO
4
8/29/16
12/15/16
  eCampus
Internet Based
Class Request Form  
 Note: DFTG 1405.91400. ONLINE. Course requires internet access. This course utilizes AutoDesk AutoCAD software. Introduction course to Computer Aided Drafting and Design and Pencil Sketching. Contact: Tina Goitia at TinaGoitia@dcccd.edu for more information on this course.
DFTG-1405-91401 (1058135)
Technical Drafting
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Billingslea, Steven  Vita
MVC/DCO
4
8/29/16
12/15/16
  eCampus
Internet Based
Class Request Form  
DFTG-1409  Basic Computer-Aided DraftingEastfield College [EFC]
DFTG-1409-41200 (1041247)
Basic Computer-Aided Drafting
L118   LEC  
M W   8:00 AM   9:55 AM
TBA   LAB  
M T W R F S U    
Hutchins, Micheal  Vita
EFC
4
8/29/16
10/20/16
(8 weeks)
  eCampus
Flex Term Aug.
 
 Note: DFTG 1409.41001. This course utilizes AutoDesk AutoCAD software. Introduction course to Computer Aided Drafting and Design. Additional lab time is required, but not scheduled. Labs can be completed at home or during open lab hours. Contact: Marques Washington at MarquesWashington@dcccd.edu or 972-860-7338 for more information on this course.
DFTG-1409-41291 (1076721)
Basic Computer-Aided Drafting
TBA   LEC  
M W   11:30 AM   12:25 PM
TBA   LAB  
M W   12:26 PM   1:05 PM
TBA   LAB  
F   1:05 PM   2:25 PM
Hutchins, Micheal  Vita
EFC
4
8/29/16
12/16/16
(16 weeks)
  eCampus
Flex Term Aug.
 
 Dual Credit Skyline High School students only. A, B schedule
DFTG-1409-41958 (1066567)
Basic Computer-Aided Drafting
TBA   LEC  
M T W R F   9:15 AM   10:45 AM
TBA   LAB  
M T W R F    
Washington, Marques  Vita
EFC
4
8/22/16
12/22/16
(18 weeks)
  eCampus
Flex Term Aug.
 
 Dual Credit - H. Grady Spruce High School Students Only
DFTG-1409-41426 (1041254)
Basic Computer-Aided Drafting
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Goitia, Tina  Vita
EFC
4
8/29/16
12/15/16
  eCampus
Internet Based
 
 Note: DFTG 1409.41426. ONLINE. Course requires internet access. This course utilizes AutoDesk AutoCAD software. Introduction course to Computer Aided Drafting and Design. Contact: Tina Goitia at tinagoitia@dcccd.edu for more information on this course.
DFTG-1409-41501 (1041430)
Basic Computer-Aided Drafting
L119   LEC  
T R   5:35 PM   6:30 PM
L119   LAB  
T R   6:35 PM   6:55 PM
TBA   LAB  
M T W R F S U    
Hutchins, Micheal  Vita
EFC
4
8/29/16
12/15/16
  eCampus
 
 Note: DFTG 1409.41501. Course requires internet access. This course utilizes AutoDesk AutoCAD software. Additional lab time is required but not scheduled. Labs can be completed at home or during open lab hours. Contact: Micheal Hutchins at Micheal Hutchins@dcccd.edu or 972-860-7681 for more information on this course.
DFTG-1409  Basic Computer-Aided DraftingMountain View College [MVC]
DFTG-1409-61280 (1066352)
Basic Computer-Aided Drafting
TBA   LEC  
M T W R   1:00 PM   2:40 PM
INET   LAB  
M T W R F S U    
Kelly, Darlena  Vita
MVC
4
8/29/16
12/15/16
  eCampus
 
 S.O.C. Collegiate Academy Dual Credit only
DFTG-1409-61470 (1054123)
Basic Computer-Aided Drafting
W113   LEC  
T R   9:00 AM   9:50 AM
INET   LAB  
M T W R F S U    
Billingslea, Steven  Vita
MVC
4
8/29/16
12/15/16
  eCampus
 
 The CADD Labs use Intel Dual Core Computers, networked with Windows 7 64 Bit operating system. All classes will be held with Video lectures and Demos. Lab time is required, but is not scheduled. Lab hours are from 9 a.m. until 9 p.m, Monday through Thursday and Fridays 9 a.m. until 4 p.m. This class will use AUTOCAD 2017
DFTG-1409-61250 (1054504)
Basic Computer-Aided Drafting
W113   LEC  
S   8:00 AM   9:50 AM
INET   LAB  
M T W R F S U    
Rodriguez, Adolph  Vita
MVC
4
8/29/16
12/15/16
  eCampus
 
 This class will use AUTOCAD 2017
DFTG-1409-61400 (1055380)
Basic Computer-Aided Drafting
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Billingslea, Steven  Vita
MVC
4
8/29/16
12/15/16
  eCampus
Internet Based
 
 Students signed up for online classes will be sent an email on the first day of class with instructions and a video on how to log on and navigate eCampus. Students must have a valid email address. Students who do not enroll prior to the first day or do not receive an email on the first day must email the instructor at sbillingslea@dcccd.edu. Online students who would like to use the CADD Lab are welcome to during the posted hours. This class will use AUTOCAD 2017
DFTG-1409-61475 (1054172)
Basic Computer-Aided Drafting
W113   LEC  
T R   5:30 PM   6:20 PM
INET   LAB  
M T W R F S U    
Osagie, Usunobun  Vita
MVC
4
8/29/16
12/15/16
  eCampus
 
 The CADD Labs use Intel Dual Core Computers, networked with Windows 7 64 Bit operating system. All classes will be held with Video lectures and Demos. Lab time is required, but is not scheduled. Lab hours are from 9 a.m. until 9 p.m, Monday through Thursday and Fridays 9 a.m. until 4 p.m. This class will use AUTOCAD 2017
DFTG-1409  Basic Computer-Aided Drafting100% Online [INET]
DFTG-1409-91400 (1053348)
Basic Computer-Aided Drafting
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Goitia, Tina  Vita
EFC/DCO
4
8/29/16
12/15/16
  eCampus
Internet Based
Class Request Form  
 Note: DFTG 1409.41426. ONLINE. Course requires internet access. This course utilizes AutoDesk AutoCAD software. Introduction course to Computer Aided Drafting and Design. Contact: Tina Goitia at tinagoitia@dcccd.edu for more information on this course.
DFTG-1409-91401 (1058142)
Basic Computer-Aided Drafting
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Billingslea, Steven  Vita
MVC/DCO
4
8/29/16
12/15/16
  eCampus
Internet Based
Class Request Form  
DFTG-1417  Arch Drft ResdEastfield College [EFC]
DFTG-1417-41501 (1041362)
Arch Drft Resd
L119   LEC  
T R   7:05 PM   8:00 PM
L119   LAB  
T R   8:05 PM   8:25 PM
TBA   LAB  
M T W R F S U    
Hutchins, Micheal  Vita
EFC
4
8/29/16
12/15/16
  eCampus
 
 Note: DFTG 1417.41501. This course utilizes AutoDesk AutoCAD software. Additional lab time is required but not scheduled. Labs can be completed at home or during open lab hours. Contact: Micheal Hutchins at Micheal Hutchins@dcccd.edu or 972-860-7681 for more information on this course.
DFTG-1417  Arch Drft ResdMountain View College [MVC]
DFTG-1417-61280 (1066990)
Arch Drft Resd
TBA   LEC  
M T W R F   7:30 AM   8:30 AM
TBA   LAB  
M T W R F    
Alsabrook, Marissa  Vita
MVC
4
8/29/16
12/15/16
  eCampus
 
 For Duncanville HS Dual Credit students only
DFTG-1417-61281 (1066991)
Arch Drft Resd
TBA   LEC  
M T W R F   2:00 PM   3:00 PM
TBA   LAB  
M T W R F    
Alsabrook, Marissa  Vita
MVC
4
8/29/16
12/15/16
  eCampus
 
 For Duncanville HS Dual Credit students only
DFTG-1417-61400 (1055385)
Arch Drft Resd
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Billingslea, Steven  Vita
MVC
4
8/29/16
12/15/16
  eCampus
Internet Based
 
 Students signed up for online classes will be sent an email on the first day of class with instructions and a video on how to log on and navigate eCampus. Students must have a valid email address. Students who do not enroll prior to the first day or do not receive an email on the first day must email the instructor at sbillingslea@dcccd.edu. Online students who would like to use the CADD Lab are welcome to during the posted hours. This class will use AUTOCAD 2017
DFTG-1425  Blueprint Reading/SketchingMountain View College [MVC]
DFTG-1425-61250 (1054510)
Blueprint Reading/Sketching
W113   LEC  
S   10:00 AM   11:50 AM
INET   LAB  
M T W R F S U    
Hoben, Bryan  Vita
MVC
4
8/29/16
12/15/16
  eCampus
 
DFTG-1445  Param Modeling & DesignEastfield College [EFC]
DFTG-1445-41426 (1041364)
Param Modeling & Design
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Washington, Marques  Vita
EFC
4
8/29/16
12/15/16
  eCampus
Internet Based
 
 Note: DFTG 1445.41426. ONLINE. Course requires internet access. Introduction to Solidworks. Marques Washington at MarquesWashington@dcccd.edu or 972-860-7338 for more information on this course.
DFTG-1445-41501 (1041385)
Param Modeling & Design
L118   LEC  
T R   7:05 PM   8:00 PM
L118   LAB  
T R   8:05 PM   8:25 PM
TBA   LAB  
M T W R F S U    
Washington, Marques  Vita
EFC
4
8/29/16
12/15/16
  eCampus
 
 Note: DFTG 1445.41501. This course utilizes Solidworks software. Introduction to Solidworks. Marques Washington at MarquesWashington@dcccd.edu or 972-860-7338 for more information on this course.
DFTG-1445  Param Modeling & DesignMountain View College [MVC]
DFTG-1445-61400 (1055393)
Param Modeling & Design
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Billingslea, Steven  Vita
MVC
4
8/29/16
12/15/16
  eCampus
Internet Based
 
 Students signed up for online classes will be sent an email on the first day of class with instructions and a video on how to log on and navigate eCampus. Students must have a valid email address. Students who do not enroll prior to the first day or do not receive an email on the first day must email the instructor at sbillingslea@dcccd.edu. Online students who would like to use the CADD Lab are welcome to during the posted hours. This class will use Autodesk Inventor 2017 or SolidWorks 2016 (Student's Choice)
DFTG-1445  Param Modeling & Design100% Online [INET]
DFTG-1445-91401 (1058150)
Param Modeling & Design
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Billingslea, Steven  Vita
MVC/DCO
4
8/29/16
12/15/16
  eCampus
Internet Based
Class Request Form  
DFTG-1495  Spc Topics in Mech DftgEastfield College [EFC]
DFTG-1495-41426 (1041399)
Spc Topics in Mech Dftg
TBA   INET  
M T W R F S U    
TBA   LAB  
M T W R F S U    
Washington, Marques  Vita
EFC
4
8/29/16
12/15/16
  eCampus
Internet Based
 
 Note: DFTG 1495.41426. This course utilizes Autodesk Inventor Software. First course in Inventor. Additional lab time is required but not scheduled. Labs can be completed at home or during open lab hours. Marques Washington at MarquesWashington@dcccd.edu or 972-860-7338 for more information on this course.
DFTG-1495-41501 (1041396)
Spc Topics in Mech Dftg
L118   LEC  
M W   7:05 PM   8:00 PM
L118   LAB  
M W   8:05 PM   8:25 PM
TBA   LAB  
M T W R F S U    
Riddle, Kelly  Vita
EFC
4
8/29/16
12/15/16
  eCampus
 
 Note: DFTG 1495.41501. This course utilizes Autodesk Inventor Software. First course in Inventor. Additional lab time is required but not scheduled. Labs can be completed at home or during open lab hours. Marques Washington at MarquesWashington@dcccd.edu or 972-860-7338 for more information on this course.
DFTG-2321  Topographical DraftingMountain View College [MVC]
DFTG-2321-61400 (1055419)
Topographical Drafting
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Billingslea, Steven  Vita
MVC
3
8/29/16
12/15/16
  eCampus
Internet Based
 
 Students signed up for online classes will be sent an email on the first day of class with instructions and a video on how to log on and navigate eCampus. Students must have a valid email address. Students who do not enroll prior to the first day or do not receive an email on the first day must email the instructor at sbillingslea@dcccd.edu. Online students who would like to use the CADD Lab are welcome to during the posted hours. This class will use AUTOCAD 2017
DFTG-2321  Topographical Drafting100% Online [INET]
DFTG-2321-91400 (1058155)
Topographical Drafting
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Billingslea, Steven  Vita
MVC/DCO
3
8/29/16
12/15/16
  eCampus
Internet Based
Class Request Form  
DFTG-2323  Pipe DraftingEastfield College [EFC]
DFTG-2323-41426 (1041400)
Pipe Drafting
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Washington, Marques  Vita
EFC
3
8/29/16
12/15/16
  eCampus
Internet Based
 
 Note: DFTG 2323.41426. ONLINE. Requires MS Word and internet access. This course utilizes AutoDesk AutoCAD software. Contact Marques Washington at MarquesWashington@dcccd.edu or 972-860-7338 for more information on this course.
DFTG-2323  Pipe Drafting100% Online [INET]
DFTG-2323-91400 (1053392)
Pipe Drafting
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Washington, Marques  Vita
EFC/DCO
3
8/29/16
12/15/16
  eCampus
Internet Based
Class Request Form  
 Note: DFTG 2323.41426. ONLINE. Requires MS Word and internet access. This course utilizes AutoDesk AutoCAD software. Contact Marques Washington at MarquesWashington@dcccd.edu or 972-860-7338 for more information on this course.
DFTG-2331  Adv Technologies Arch Des DftEl Centro College [ECC]
DFTG-2331-51001 (1046720)
Adv Technologies Arch Des Dft
TBA   LEC  
T R   1:30 PM   4:15 PM
TBA   LAB  
T R   1:30 PM   4:15 PM
Vail, Douglas  Vita
ECC
3
8/29/16
12/15/16
  eCampus
 
 Prerequisite: INDS students must have passed Commerical Design 1 (INDS 1345) with a grade of C or better to enroll. ARCH students must have passed Intro to Architecture (ARCH 1311) with a grade of C or better to enroll. This class will be held at One Main Place, 1201 Main Street, 8th floor, Dallas, TX 75202.
DFTG-2332  Adv Computer-Aided DraftingRichland College [RLC]
DFTG-2332-81001 (1051867)
Adv Computer-Aided Drafting
WH153   LEC  
M W   2:00 PM   2:55 PM
WH153   LAB  
M W   3:00 PM   4:50 PM
Manouchehripour, Muhammed  Vita
RLC
3
8/29/16
12/15/16
  eCampus
 
 PreReq: DFTG 1309 Basic CAD/ Topic: AUTOCAD 2016 software used.
DFTG-2332-81965 (1087247)
Adv Computer-Aided Drafting
TBA   LEC  
T R   10:45 AM   12:15 PM
TBA   LAB  
T R   12:20 PM   12:55 PM
Ortley, Lester  Vita
RLC
3
10/24/16
6/5/17
(16 weeks)
  eCampus
Flex Term Oct.
 
 Dual Credit Section 81965 meets 10/24/16 to 6/05/17 at North Garland High School. Enrollment by petition only with Dual Credit Staff
DFTG-2332-81930 (1088203)
Adv Computer-Aided Drafting
SCOCL   LEC  
M T W R F   2:24 PM   2:44 PM
SCOCL   LAB  
M T W R F   2:45 PM   3:13 PM
Moore, John  Vita
RLC
3
11/2/16
5/17/17
(16 weeks)
  Flex Term Nov.
 
 Dual Credit Section 81930 meets 11/2/16 to 06/05/17 at Lake Highlands High School. Enrollment by petition only with Dual Credit Staff.
DFTG-2332-81931 (1089674)
Adv Computer-Aided Drafting
SCOCL   LEC  
M T W R F   2:24 PM   2:44 PM
SCOCL   LAB  
M T W R F   2:45 PM   3:13 PM
Moore, John  Vita
RLC
3
11/18/16
6/5/17
(16 weeks)
  Flex Term Nov.
 
 Dual Credit Section 81931 meets 11/18/16 to 06/05/17 at Lake Highlands High School. Enrollment by petition only with Dual Credit Staff.
DFTG-2336  Cad ProgramminMountain View College [MVC]
DFTG-2336-61400 (1055430)
Cad Programmin
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Hoben, Bryan  Vita
MVC
3
8/29/16
12/15/16
  eCampus
Internet Based
 
 Students signed up for online classes will be sent an email on the first day of class with instructions and a video on how to log on and navigate eCampus. Students must have a valid email address. Students who do not enroll prior to the first day or do not receive an email on the first day must email the instructor at sbillingslea@dcccd.edu. Online students who would like to use the CADD Lab are welcome to during the posted hours.
DFTG-2336  Cad Programmin100% Online [INET]
DFTG-2336-91400 (1058147)
Cad Programmin
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Hoben, Bryan  Vita
MVC/DCO
3
8/29/16
12/15/16
  eCampus
Internet Based
Class Request Form  
DFTG-2380  Coop Ed Dftg/Desgn Tch/Tchn, GEastfield College [EFC]
DFTG-2380-41501 (1041402)
Coop Ed Dftg/Desgn Tch/Tchn, G
TBA   LEC  
M T W R F S U    
TBA   COOP  
M T W R F S U    
Washington, Marques  Vita
EFC
3
8/29/16
12/15/16
  eCampus
Self Paced
 
 This course is for students who are currently employed in the CADD field. Students must work at least 20 per hours. Marques Washington at MarquesWashington@dcccd.edu or 972-860-7338 for more information on this course.
DFTG-2402  Machine DraftingMountain View College [MVC]
DFTG-2402-61400 (1055435)
Machine Drafting
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Billingslea, Steven  Vita
MVC
4
8/29/16
12/15/16
  eCampus
Internet Based
 
 Students signed up for online classes will be sent an email on the first day of class with instructions and a video on how to log on and navigate eCampus. Students must have a valid email address. Students who do not enroll prior to the first day or do not receive an email on the first day must email the instructor at sbillingslea@dcccd.edu. Online students who would like to use the CADD Lab are welcome to during the posted hours. This class will use Autodesk Inventor 2017 or SolidWorks 2016 Student's Choice)
DFTG-2419  Intermed Computer Aided DftgEastfield College [EFC]
DFTG-2419-41426 (1041406)
Intermed Computer Aided Dftg
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Goitia, Tina  Vita
EFC
4
8/29/16
12/15/16
  eCampus
Internet Based
 
 Note: DFTG 2419.41426. ONLINE. Course requires internet access. This course utilizes AutoDesk AutoCAD software. Contact: Tina Goitia at TinaGoitia@dcccd.edu for more information on this course.
DFTG-2419  Intermed Computer Aided DftgMountain View College [MVC]
DFTG-2419-61250 (1054520)
Intermed Computer Aided Dftg
W113   LEC  
S   10:00 AM   11:50 AM
INET   LAB  
M T W R F S U    
Rodriguez, Adolph  Vita
MVC
4
8/29/16
12/15/16
  eCampus
 
 This class will use AUTOCAD 2017
DFTG-2419-61400 (1055440)
Intermed Computer Aided Dftg
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Billingslea, Steven  Vita
MVC
4
8/29/16
12/15/16
  eCampus
Internet Based
 
 Students signed up for online classes will be sent an email on the first day of class with instructions and a video on how to log on and navigate eCampus. Students must have a valid email address. Students who do not enroll prior to the first day or do not receive an email on the first day must email the instructor at sbillingslea@dcccd.edu. Online students who would like to use the CADD Lab are welcome to during the posted hours. This class will use AUTOCAD 2017
DFTG-2428  Architectural Dftg-CommercialEastfield College [EFC]
DFTG-2428-41426 (1041411)
Architectural Dftg-Commercial
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
TBA   LAB  
M T W R F S U    
Washington, Marques  Vita
EFC
4
8/29/16
12/15/16
  eCampus
Internet Based
 
 Note: DFTG 2428.41426. ONLINE. This course requires internet access. Course utilizes Autodesk Revit software. Marques Washington at MarquesWashington@dcccd.edu or 972-860-7338 for more information on this course.
DFTG-2428-41501 (1041408)
Architectural Dftg-Commercial
L118   LEC  
T R   5:35 PM   6:25 PM
L118   LAB  
T R   6:30 PM   7:00 PM
TBA   LAB  
M T W R F S U    
Washington, Marques  Vita
EFC
4
8/29/16
12/15/16
  eCampus
 
 Note: DFTG 2428.41501. Course utilizes Autodesk Revit software. Additional lab time is required but not scheduled. Labs can be completed at home or during open lab hours. Marques Washington at MarquesWashington@dcccd.edu or 972-860-7338 for more information on this course.
DFTG-2428  Architectural Dftg-CommercialMountain View College [MVC]
DFTG-2428-61400 (1055446)
Architectural Dftg-Commercial
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Billingslea, Steven  Vita
MVC
4
8/29/16
12/15/16
  eCampus
Internet Based
 
 Students signed up for online classes will be sent an email on the first day of class with instructions and a video on how to log on and navigate eCampus. Students must have a valid email address. Students who do not enroll prior to the first day or do not receive an email on the first day must email the instructor at sbillingslea@dcccd.edu. Online students who would like to use the CADD Lab are welcome to during the posted hours. This class will use Revit 2017
DFTG-2428  Architectural Dftg-Commercial100% Online [INET]
DFTG-2428-91400 (1058169)
Architectural Dftg-Commercial
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Billingslea, Steven  Vita
MVC/DCO
4
8/29/16
12/15/16
  eCampus
Internet Based
Class Request Form  
DFTG-2430  Civil DraftingMountain View College [MVC]
DFTG-2430-61400 (1055450)
Civil Drafting
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Hoben, Bryan  Vita
MVC
4
8/29/16
12/15/16
  eCampus
Internet Based
 
 Students signed up for online classes will be sent an email on the first day of class with instructions and a video on how to log on and navigate eCampus. Students must have a valid email address. Students who do not enroll prior to the first day or do not receive an email on the first day must email the instructor at sbillingslea@dcccd.edu. Online students who would like to use the CADD Lab are welcome to during the posted hours. This Class will use AutoCAD Civil 3D 2017
DFTG-2431  Adv Techn in Archit Dsgn/DftgEastfield College [EFC]
DFTG-2431-41426 (1041416)
Adv Techn in Archit Dsgn/Dftg
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Washington, Marques  Vita
EFC
4
8/29/16
12/15/16
  eCampus
Internet Based
 
 Note: DFTG 2431.41426. ONLINE. This course requires internet access. Course utilizes Autodesk Revit software. Marques Washington at MarquesWashington@dcccd.edu or 972-860-7338 for more information on this course.
DFTG-2431  Adv Techn in Archit Dsgn/DftgMountain View College [MVC]
DFTG-2431-61280 (1066992)
Adv Techn in Archit Dsgn/Dftg
TBA   LEC  
M T W R F   7:30 AM   8:30 AM
TBA   LAB  
M T W R F    
Alsabrook, Marissa  Vita
MVC
4
8/29/16
12/15/16
  eCampus
 
 For Duncanville HS Dual Credit students only
DFTG-2431-61281 (1066994)
Adv Techn in Archit Dsgn/Dftg
TBA   LEC  
M T W R F   2:00 PM   3:00 PM
TBA   LAB  
M T W R F    
Alsabrook, Marissa  Vita
MVC
4
8/29/16
12/15/16
  eCampus
 
 For Duncanville HS Dual Credit students only
DFTG-2431  Adv Techn in Archit Dsgn/Dftg100% Online [INET]
DFTG-2431-91400 (1053404)
Adv Techn in Archit Dsgn/Dftg
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Washington, Marques  Vita
EFC/DCO
4
8/29/16
12/15/16
  eCampus
Internet Based
Class Request Form  
 Note: DFTG 2431.41426. ONLINE. This course requires internet access. Course utilizes Autodesk Revit software. Marques Washington at MarquesWashington@dcccd.edu or 972-860-7338 for more information on this course.
DFTG-2432  Adv Computer-Aided DraftingMountain View College [MVC]
DFTG-2432-61400 (1055484)
Adv Computer-Aided Drafting
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Woodward, David  Vita
MVC
4
8/29/16
12/15/16
  eCampus
Internet Based
 
 Students signed up for online classes will be sent an email on the first day of class with instructions and a video on how to log on and navigate eCampus. Students must have a valid email address. Students who do not enroll prior to the first day or do not receive an email on the first day must email the instructor at sbillingslea@dcccd.edu. Online students who would like to use the CADD Lab are welcome to during the posted hours.
DFTG-2432  Adv Computer-Aided Drafting100% Online [INET]
DFTG-2432-91400 (1058184)
Adv Computer-Aided Drafting
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Woodward, David  Vita
MVC/DCO
4
8/29/16
12/15/16
  eCampus
Internet Based
Class Request Form  
DFTG-2440  Solid Modeling/DesignEastfield College [EFC]
DFTG-2440-41426 (1041418)
Solid Modeling/Design
INET   INET  
M T W R F S U    
INET   LAB  
M T W R F S U    
Washington, Marques  Vita
EFC
4
8/29/16
12/15/16
  eCampus
Internet Based
 
 Note: DFTG 2440.41426. ONLINE. This course requires internet access. This is the second course in solidworks. Prerequisite DFTG 1445. Marques Washington at MarquesWashington@dcccd.edu or 972-860-7338 for more information on this course.
ENTC-2381  Coop Ed - Engr Tech, GeneralRichland College [RLC]
ENTC-2381-81001 (1052071)
Coop Ed - Engr Tech, General
WH151   LEC  
M T W R F    
WH151   COOP  
M T W R F    
Goldammer, Kory  Vita
RLC
3
8/29/16
12/15/16
  eCampus
 
 Reqd: Instructor approval prior to registration in addition to working minimum of 20 hrs per week in technical related position in Computer-Aided Design. See Technical Advisor to register/ Note: Time and day for on-campus seminar will be determined by instructor based upon student schedules. Mandatory orientation - Date and time TBA.
ENTC-2381-81260 (1085412)
Coop Ed - Engr Tech, General
SCOCL   LEC  
M T W R F    
SCOCL   COOP  
M T W R F    
Goldammer, Kory  Vita
RLC
3
10/11/16
12/15/16
(10 weeks)
  eCampus
Flex Term Oct.
 
 Delivery: Flex Term meets 10/11-12/15/ Reqd: Instructor approval prior to registration in addition to working minimum of 20 hrs per week in technical related position./ Note: Time and day for on-campus seminar will be determined by instructor based upon student schedules. Mandatory orientation - Date and time TBA.
HYDR-1345  Hydraulics and PneumaticsRichland College [RLC]
HYDR-1345-81501 (1051872)
Hydraulics and Pneumatics
WH152   LEC  
M W   5:40 PM   6:35 PM
WH157   LAB  
M W   6:40 PM   8:25 PM
Fling, George  Vita
RLC
3
8/29/16
12/15/16
  eCampus
 
HYDR-1445  Hydraulics and PneumaticsRichland College [RLC]
HYDR-1445-81501 (1077403)
Hydraulics and Pneumatics
WH152   LEC  
M W   5:40 PM   6:35 PM
WH157   LAB  
M W   6:40 PM   8:25 PM
Fling, George  Vita
RLC
4
8/29/16
12/15/16
  eCampus
 
 Note: Class is cross-listed with HYDR-1345.
INMT-1343  Compu Aided Dsgn/Mfg(CAD/CAM)Eastfield College [EFC]
INMT-1343-41501 (1039135)
Compu Aided Dsgn/Mfg(CAD/CAM)
T107   LEC  
M W   8:00 PM   8:55 PM
T107   LAB  
M W   9:00 PM   10:45 PM
Higgins, Larry  Vita
EFC
3
8/29/16
12/15/16
  eCampus
 
MCHN-1301  Beginning Machine ShopEastfield College [EFC]
MCHN-1301-41501 (1039124)
Beginning Machine Shop
T010   LEC  
T R   7:00 PM   7:55 PM
T012   LAB  
T R   8:00 PM   9:00 PM
Dixon, Daniel  Vita
EFC
3
8/29/16
12/15/16
  eCampus
 
MCHN-1326  Intro Computer Aided ManufMountain View College [MVC]
MCHN-1326-61470 (1059900)
Intro Computer Aided Manuf
INET   LEC  
M T W R F S U    
W121E   LAB  
S   8:00 AM   9:50 AM
Harmon, Perry  Vita
MVC
3
8/29/16
12/15/16
  eCampus
 
 This course is a hybrid which consists of an online lecture and in-class lab. Open Labs will be announced at the 1st Class Meeting. Students must attend at least 6 hours per week in the lab.
MCHN-1326  Intro Computer Aided ManufRichland College [RLC]
MCHN-1326-81002 (1060885)
Intro Computer Aided Manuf
WH129   LEC  
T R   11:00 AM   11:25 AM
WH129   LAB  
T R   11:30 AM   2:15 PM
Fleming, Brian  Vita
RLC
3
8/29/16
12/15/16
  eCampus
 
 PreReq: DFTG 1309 Basic CAD/ Topic: MASTERCAM-X9 software used. MILL I Professional Certification. NIMS Machine Level I Credential/ Note: Course replaces INMT 1343 CAD/CAM.
MCHN-1326-81501 (1051925)
Intro Computer Aided Manuf
WH129   LEC  
M W   5:40 PM   6:10 PM
WH129   LAB  
M W   6:15 PM   9:00 PM
Fleming, Brian  Vita
RLC
3
8/29/16
12/15/16
  eCampus
 
 PreReq: DFTG 1309 Basic CAD/ Topic: MASTERCAM-X9 software used. MILL I Professional Certification. NIMS Machine Level I Credential/ Note: Course replaces INMT 1343 CAD/CAM.
MCHN-1338  Basic Machine Shop IRichland College [RLC]
MCHN-1338-81001 (1051930)
Basic Machine Shop I
WH187   LEC  
M W   2:00 PM   2:30 PM
WH187   LAB  
M W   2:35 PM   5:20 PM
Miller, Gregory  Vita
RLC
3
8/29/16
12/15/16
   
 Note: NIMS Machine Level I Credential.
MCHN-1338-81002 (1051936)
Basic Machine Shop I
WH187   LEC  
T R   8:00 AM   8:30 AM
WH187   LAB  
T R   8:35 AM   11:20 AM
Van Hamersveld, Craig  Vita
RLC
3
8/29/16
12/15/16
  eCampus
 
 Note: NIMS Machine Level I Credential.
MCHN-1338-81901 (1090794)
Basic Machine Shop I
TBA   LEC  
M T W R F   1:30 PM   2:30 PM
TBA   LAB  
M T W R F   2:35 PM   3:15 PM
Morales, Max  Vita
RLC
3
10/24/16
5/31/17
(16 weeks)
  Flex Term Oct.
 
 Dual Cedit Section 81901 meets 10/24/16 to 05/31/17 at Richardson High School. Enrollment by petition only with Dual Credit Staff.
MCHN-1338-81501 (1051945)
Basic Machine Shop I
WH187   LEC  
M W   6:00 PM   6:30 PM
WH187   LAB  
M W   6:35 PM   9:20 PM
Whitten, Matthew  Vita
RLC
3
8/29/16
12/15/16
  eCampus
 
 Note: NIMS Machine Level I Credential.
MCHN-1338-81502 (1051940)
Basic Machine Shop I
WH187   LEC  
T R   6:00 PM   6:30 PM
WH187   LAB  
T R   6:35 PM   9:20 PM
Futch, Cecil  Vita
RLC
3
8/29/16
12/15/16
  eCampus
 
 Note: NIMS Machine Level I Credential.
MCHN-1343  Machine Shop MathematicsEastfield College [EFC]
MCHN-1343-41501 (1039120)
Machine Shop Mathematics
T010   LEC  
T R   5:45 PM   6:55 PM
TBA   LAB  
M T W R F S U    
Higgins, Larry  Vita
EFC
3
8/29/16
12/15/16
  eCampus
 
MCHN-1352  Intermediate Machining IRichland College [RLC]
MCHN-1352-81002 (1060886)
Intermediate Machining I
WH187   LEC  
T R   2:20 PM   2:45 PM
WH187   LAB  
T R   2:50 PM   5:35 PM
Van Hamersveld, Craig  Vita
RLC
3
8/29/16
12/15/16
  eCampus
 
 Suggested PreReq: MCHN 1338/ Note: NIMS Machine Level I Credential.
MCHN-1438  Basic Machine Shop IMountain View College [MVC]
MCHN-1438-61470 (1059899)
Basic Machine Shop I
INET   LEC  
M T W R F S U    
W121E   LAB  
S   8:00 AM   9:50 AM
Vu, Tuan  Vita
MVC
4
8/29/16
12/15/16
  eCampus
 
 This course is a hybrid which consists of an online lecture and in-class lab. Open Labs will be announced at the 1st Class Meeting. Students must attend at least 6 hours per week in the lab.
MCHN-1454  Intermediate Machining IIEastfield College [EFC]
MCHN-1454-41501 (1039129)
Intermediate Machining II
T010   LEC  
M W   6:00 PM   6:55 PM
T012   LAB  
M W   7:00 PM   9:55 PM
Dixon, Daniel  Vita
EFC
4
8/29/16
12/15/16
  eCampus
 
MCHN-1454  Intermediate Machining IIMountain View College [MVC]
MCHN-1454-61470 (1059903)
Intermediate Machining II
INET   LEC  
M T W R F S U    
W121E   LAB  
S   8:00 AM   9:50 AM
Vu, Tuan  Vita
MVC
4
8/29/16
12/15/16
  eCampus
 
 This course is a hybrid which consists of an online lecture and in-class lab. Open Labs will be announced at the 1st Class Meeting. Students must attend at least 6 hours per week in the lab.
MCHN-2335  Advanced CNC MachiningRichland College [RLC]
MCHN-2335-81001 (1051957)
Advanced CNC Machining
WH129   LEC  
M W   2:00 PM   2:30 PM
WH129   LAB  
M W   2:35 PM   5:20 PM
Fleming, Brian  Vita
RLC
3
8/29/16
12/15/16
  eCampus
 
 PreReq: DFTG 1345, MCHN 1326/ Topic: Multi-Axis, MASTERCAM X9 software used.
MCHN-2338  Adv Computer-Aided Mfg (CAM)Mountain View College [MVC]
MCHN-2338-61470 (1059910)
Adv Computer-Aided Mfg (CAM)
INET   LEC  
M T W R F S U    
W121E   LAB  
S   8:00 AM   9:50 AM
Harmon, Perry  Vita
MVC
3
8/29/16
12/15/16
  eCampus
 
 This course is a hybrid which consists of an online lecture and in-class lab. Open Labs will be announced at the 1st Class Meeting. Students must attend at least 6 hours per week in the lab.
MCHN-2434  Operation CNC Machining CenteEastfield College [EFC]
MCHN-2434-41250 (1039140)
Operation CNC Machining Cente
T011   LEC  
S   8:00 AM   10:05 AM
T011   LAB  
S   10:10 AM   2:20 PM
Higgins, Larry  Vita
EFC
4
8/29/16
12/15/16
  eCampus
 
 Note: Prerequisites for this course: MCHN 1301, MCHN 1454 & INMT 1343 (or INMT 1345)
MCHN-2441  Advanced Machining IEastfield College [EFC]
MCHN-2441-41501 (1039141)
Advanced Machining I
T010   LEC  
M W   6:00 PM   6:55 PM
T012   LAB  
M W   7:00 PM   9:55 PM
Dixon, Daniel  Vita
EFC
4
8/29/16
12/15/16
  eCampus
 
MCHN-2441  Advanced Machining IMountain View College [MVC]
MCHN-2441-61470 (1059912)
Advanced Machining I
INET   LEC  
M T W R F S U    
W121E   LAB  
S    
Cox, Charles  Vita
MVC
4
8/29/16
12/15/16
  eCampus
 
 This course is a hybrid which consists of an online lecture and in-class lab. Open Labs will be announced at the 1st Class Meeting. Students must attend at least 6 hours per week in the lab.
 
 
Close
Our Colleges